Products

D.E.R.® 3401 is a low viscosity rapidly reacting bisphenol a/f epoxy resin designed for fast-curing coatings, adhesives, and mortars.

EBECRYL® 645 functions as a binder and resin in CASE ingredients and is compatible with wood substrates.

D.E.R.® 6225 is a modified, low molecular weight, solid reaction product of epichlorohydrin and bisphenol A. D.E.R. 6225 Resin is a modified, low molecular weight, solid epoxy resin which has been developed mainly for use in powder coatings. It has been designed for applications where excellent flow out and high gloss are required such as automotive, appliance or general metal decorative coatings. D.E.R.® 6225 is also suitable for use in thin film applications.

D.E.R.® 916 Epoxy Resin is a modified, semi-solid, epoxy novolac resin emulsified in water.

D.E.N.® 424 is used in protective coatings and functions as a binder, resin, and matrix material in CASE ingredients and composite materials.

D.E.R.® 667-20 is a high molecular weight "7-type" epoxy resin.

D.E.R.® 664 HA functions as a binder and resin in CASE ingredients.

D.E.R.® 6155 Solid Epoxy Resin is a medium/high molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 6155 Solid Epoxy Resin is a high molecular weight solid epoxy resin designed primarily for use in powder coating formulations which require greater flexibility. D.E.R.® 6155 Solid Epoxy Resin can be used in combination with most curing agents for epoxy powder coatings systems with good results. To achieve maximum flexibility, curing with a linear phenolic hardener such as the D.E.H.® 80 Hardeners is recommended. D.E.R.® 6155 Solid Epoxy Resin can also be used in combination with other epoxy resins to obtaining specific processing or performance properties.

D.E.N.® 438-MAK80 is a solution of a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac in methyl n-amyl ketone.

D.E.R.® 661 is a standard, low molecular weight, solid epoxy resin designed for use in applications where cure must be achieved at room temperature. D.E.R.® 661 Solid Epoxy Resin can be formulated in solution to yield an excellent base for the formulation of high quality chemical resistant coatings, when cured with polyamine or polyamide curing agents. D.E.R.® 661 Solid Epoxy Resin is also widely used for glass sizing applications. D.E.R.® 661 Epoxy Resin is available in various solutions, e.g. under the designation D.E.R. 671-X75 Epoxy Resin Solution, a solution in xylene (75 wt%). The change in designation from D.E.R.® Epoxy Resin to D.E.R.® 671 Epoxy Resin in this designation reflects the slight difference in epoxy equivalent range in the solution form. D.E.R.® 661 Solid Epoxy Resin can also be used as a complimentary epoxy resin in non-epoxy coating systems to improve resistance properties.

D.E.N.® 438L is a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac.

NANOPOX® C 620 shows the highest performance in scratch and abrasion resistance without influencing the gloss or transparency of the cured cationic UV-coating

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

D.E.R.® 671-XM75 is a low molecular weight epoxy resin solution in xylene/methyl isobutyl ketone.

APODIL 1012 is a semi solid, multi-functional glycidyl ether of phenol novolac resin with an average functionality 2.5.