Products

EBECRYL® 3708 is a modified bisphenol A epoxy diacrylate that exhibits relatively low viscosity and good cure response. Films of EBECRYL® 3708 cured by ultra- violet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, and superior impact resistance.

ACEMATT® 3400 is a specially after-treated thermal silica with a unique property profile. Along with excellent matting efficiency, it provides multiple functionalities in coating formulations. It is especially recommended for soft-feel applications with high surface smoothness.

EBECRYL® 896 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. EBECRYL® 896 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required.

EBECRYL® 4141 is an undiluted Isocyanate-bearing urethane acrylate designed for use in two-component systems for coatings on wood, plastic and metal.

EBECRYL® 4397 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. EBECRYL® 4397 exhibits greater flexibility in comparison to other isocyanate functional urethane acrylates such as EBECRYL 4150(1).

UCECOAT® 7655 is a radiation curable polyurethane dispersion which is tack-free before cure and after water evaporation. It has been developed for high end wooden furniture top-coats, both transparent and pigmented, but can also be used for other applications and substrates, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. This polyurethane dispersion is very reactive and exhibits very good scratch resistance. Due to the low viscosity, it can be applied by spray or curtain coater.

NANOCRYL® C 140 shows the highest performance in scratch and abrasion resistance without influencing gloss or transparency of the cured UV-coating.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

TEGO® Twin 4100 as a siloxane-based gemini surfactant, combines substrate wetting and anti-crater effects with some defoaming properties. It is highly compatible and suitable for a wide range of different coatings and applications.

EBECRYL® 170 is an acidic acrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

TEGO® Wet 500 is a silicone-free substrate wetting additive with low foam tendecy. It is highly recommended for water borne coatings with dynamic applications.

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal.

DYNOL™ 360 is an organic-based superwetter providing great substrate wetting especially on difficult-to-wet substrates. DYNOL™ 360 also acts as a coalescing aid and is suitable for waterborne coatings and inks.

EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. This product is characterized by its light color, fast cure response and improved pigment wetting. Films of EBECRYL®640/20 TO cured by ultraviolet light (UV) or electron beam (EB) exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. EBECRYL®640/20 TO finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes.

DPGDA is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.