Products

EBECRYL® 608 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent OTA- 480, propoxylated glycerol triacrylate. EBECRYL® 608 exhibits light color and very fast cure response. Films of EBECRYL® 608 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness and gloss, low residual odor and excellent chemical resistance.

TEGO® Glide 496 provides outstanding slip and touch properties without compromising recoatatability and compatibility. It is highly effective and can be used in a broad range of different coating and ink systems.

UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. Because of its non-irritant nature and low viscosity, it can be applied safely by spray coating and curtain coating.

UCECOAT® 7788 is a tin-free, VOC-free, aliphatic polyurethane acrylate dispersion in water. It is a robust and versatile resin ideally suited for UV/EB energy curable industrial coatings applied by spray, curtain or roll coating. UCECOAT® 7788 can be used as the sole formulation resin or in combination with other water-borne resins.

TEGO® AIREX 901 W is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications.

TEGO® Phobe 1409 is an amino-siloxane emulsion for the hydrophobization of coating formulations. It reduces the water uptake and generates a water-beading effect, even in paints with high pH value.

AERODISP® WF 7620 is an aqueous 20% dispersion of a functionalized fumed aerosil

EBECRYL® 4849 is an aromatic urethane diacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 4849 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and abrasion resistance.

SURFYNOL® 485 is a substrate wetting agent for waterborne coatings and inks with high solubility in aqueous systems. SURFYNOL® 485 can also be used for its stabilization and emulsification properties.

TEGO® AddBond LTH improves adhesion of coatings on metal and plastic substrates. It does not soften the coating film and can be used for solvent borne, solvent-free, and radiation-curing coating systems.

CYMEL® UI-27-EI Resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. CYMEL® UI-27-EI Resin is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. CYMEL® UI-27-EI Resin is not suitable for exterior applications.

TEGO® Wet 500 is a silicone-free substrate wetting additive with low foam tendecy. It is highly recommended for water borne coatings with dynamic applications.

EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fast cure response. Films of EBECRYL® 605/20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin.

ACEMATT ® HK 390 is an untreated, very-fine-particle-sized matting agent based on precipitated silica. Duetoitshigh compatibility, it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling.

HP1717 - Polystar Soya Long Oil Alkyd is a long oil alkyd made with soya oil in low odour mineral spirits. It has been formulated for use in wood and metal coatings and architectural enamels. This product exhibits low yellowing, good gloss, and good overall appearance.