Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM11962
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Performance Highlights
EBECRYL®605/20 is characterized by:
- Light color
- Low viscosity
- Fast cure response
UV/EB cured products based on EBECRYL®605/20 are characterized by the following performance properties:
- Good surface hardness
- High gloss
- Good chemical resistance
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as reactive diluents, additives and photoinitiators.
Applications & Uses
- Adhesive & Sealant End Applications
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Ink & Toner End Applications
- Markets
- Applications
- Product Application
- Formulated UV/EB curable products containing EBECRYL®605/20 may be applied via direct or reverse roll, offset gravure, metering rod, slot die, knife over roll, air knife, curtain, immersion and spin coating methods, as well as screen printing.
EBECRYL®605/20 is recommended for use in:
- Overprint varnishes
- Coatings for wood, chipboard, paper and rigid plastics
- Paper upgrading
- Screen print inks and coatings
- Adhesive for paper laminations
- Wood fillers
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Technical Details & Test Data
- Viscosity Reduction
- EBECRYL®605/20 can be further diluted with additional TPGDA or other reactive monomers such as dipropyleneglycol diacrylate (DPGDA), 1,6-hexanediol diacrylate (HDDA), propoxylated glycerol triacrylate (OTA-480), or trimethylolpropane triacrylate (TMPTA).
- The specific reactive diluent(s) used will influence performance properties such as hardness and flexibility.
Safety & Health
- Safety Precautions
- Avoid contact with eyes, skin and clothing.
- Direct contact with this material may cause skin irritation and serious eye irritation.
- Repeated or prolonged dermal contact may cause allergic skin reactions.
- Wash thoroughly after handling.
- Use with adequate ventilation.
- Keep container closed.
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Handling Conditions
- The recommended storage temperature range for EBECRYL®605/20 is 4°C to 40°C (39°F to 104°F).
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellowish
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Ester acrylate
- Other Hazards
- Polymerization may occur from excessive heat , contamination or exposure to direct sunlight .
- USA/DOT UN Number
- UN3082
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 2.0 Gardner Gardner Gardner Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Value max. 2.0 mg KOH/g mg KOH/g Epoxy Group Content max. 0.4 % % - Mechanical Properties
Value Units Test Method / Conditions Elongation 3.8 % % at break, UV cured 125 μ thick films Tensile Modulus 462000.0 psi psi at break, UV cured 125 μ thick films Tensile Modulus 462000.0 psi psi UV cured 125 µ thick films Tensile Strength 10800.0 psi psi at break, UV cured 125 μ thick films Tensile Strength 10800.0 psi psi UV cured 125 µ thick films - Physical Properties
Value Units Test Method / Conditions Density 1.14 g/mL g/mL At 25°C Viscosity 25000.0 cPs cPs At 25°C - Material Composition
Value Units Test Method / Conditions Oligomer Content 80.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Density (SDS) 1.17 g/cm³ g/cm³ Flash Point (SDS) min. 100.0 °C °C Cleveland Open Cup Vapor Pressure (SDS) max. 1.33 hPa hPa at 20°C Volatile Content (SDS) max. 0.3 % %