Products

CYMEL® U-663 resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties combined with very good block resistance makes CYMEL® U-663 resin suitable for acid curing wood coating applications where low formaldehyde emission and high film gloss is required.

CYMEL® UI-20-E Resin is a partially iso-butylated urea crosslinker designed for use in acid curing wood coatings with high film build requirements. Being supplied in ethanol, films dry very quickly resulting in coatings with excellent early block resistance.

PARALOID™ B-72 100% Resin has low reactivity with sensitive phosphorescent and luminescent pigments to produce stable, durable, non-yellowing coatings. It is compatible with vinyls, cellulosics, chlorinated rubbers, and silicones. It is well suited for white and metallic aerosols, clear coatings for wood, nitrocellulose modified coatings for general product finishing, pigment dispersion (fluorescent), flexographic printing inks, and gravure plastic coatings.

K-FLEX® 500P is a blend of diethylene glycol dibenzoate and dipropylene glycol dibenzoate that was created to lower the VOC content of a coating more than other K-FLEX® 500P plasticizers. It was specifically designed for the coatings industry where very low VOC content is required or other application areas where low VOC content is critical.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

HP7031 Coconut Alkyd is a short oil alkyd resin dissolved in xylene that uses coconut oil to produce a resin with initial low colour and little or no yellowing on aging.

CYMEL® MI-97-IX Resin is a partially iso-butylated melamine crosslinker supplied in a mixture of iso-butanol and xylene. Its fast drying behavior provides films with good early block resistance for stacking of parts and makes CYMEL® MI-97-IX Resin suitable for fast low temperature curing systems, like wood and paper coatings, providing very good film hardness, adhesion and appearance.

CYMEL® UB-30-B resin is a n-butylated urea crosslinker supplied in n-butanol. Its fast film hardness development combined with excellent adhesion properties makes CYMEL® UB-30-B resin suitable for a wide range of industrial baking applications.

CYMEL® UI-38-I resin is a partially iso-butylated urea crosslinker supplied in iso-butanol and intended for use in industrial stoving applications and especially systems applied by electrostatic spray. Because of the poor weathering resistance of urea resins, CYMEL® UI-38-I is not recommended for exterior applications.

CYMEL® U-662 resin is a partially iso-butylated urea crosslinker supplied in a mixture of iso-butanol and xylene. CYMEL® U-662 resin has high reactivity and a high tendency for self-condensation providing fast drying films with good gloss, hardness and block resistance. CYMEL® U-662 resin is an excellent crosslinker for acid curing wood coating applications where low formaldehyde emission is required.

CYMEL® UI-21-E Resin is a partially iso-butylated urea resin supplied in ethanol. It has been designed for a wide range of high build, low odor industrial wood finishes. CYMEL® UI-21-E Resin is not suitable for exterior applications.

Flexricin® P-3 is an outstanding plasticizer for polyvinyl butyral, rosin, vinysol resin and cellulose acetate butyrate resins. It also functions as a general purpose plasticizer for both nitrocellulose and ethylcellulose resin systems, and as an internal reactive plasticizer for polyurethanes.

CYMEL® UM-15 resin is a highly methylated urea crosslinker supplied as a liquid at >96% solids. Its high solids combined with very fast cure makes CYMEL® UM-15 resin suitable in high solids, low temperature curing systems, like wood and paper coatings. CYMEL® UM-15 is hydrophilic in nature, completely water soluble, and has very good compatibility with water soluble anionic backbone polymers. This makes CYMEL® UM-15 resin suitable for waterborne applications, like paper and wood coatings, where speed of cure is very important.

CRAYVALLAC® PA3 X 20 is used in solventborne coatings, top coats, varnishes, and wood coatings. It is compatible with acrylics, alkyds, nitrocellulose, and polyurethanes (PU) and is suitable for wood substrates.