Products

SURFYNOL® 61 surfactant is a 100% active multifunctional surface active agent. Due to its volatile nature, SURFYNOL® 61 surfactant can evaporate from a system under use conditions and/or heating. Therefore, SURFYNOL® 61 surfactant is useful in applications where residual surface activity or contamination is undesirable, such as silicon wafer and glass cleaning. SURFYNOL® 61 surfactant can provide excellent wetting of polyethylene and polypropylene films. Upon evaporation, little to no surfactant remains to interfere with trapping or cause water sensitivity in printing inks. During the curing of silicones by the silane/alkene addition reaction, SURFYNOL® 61 surfactant can “block” platinum catalysts through complexation; this effect can be used to delay the curing reaction. However, the SURFYNOL® 61 surfactant typically flashes off upon heating to liberate the active catalyst and trigger the reaction.

Bluesil™ SLT 10T is a one-component, odorless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. Bluesil™ SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures.

UCECOAT® 2501 is a tin-free, VOC free, aliphatic polyurethane acrylate dispersion. It is a robust and versatile resin ideally suited for energy curable industrial coatings applied by spray, curtain or roller coating. UCECOAT 2501 is mainly intended to be used as blending partner with water-borne resins, both UV/EB reactive and WB acrylics.

K-FLEX® DP is dipropylene glycol dibenzoate, which is one of the oldest members of the benzoate plasticizer family and one of the most versatile polar, high solvating plasticizers still commercially available. K-FLEX® DP is compatible with a wide range of polar polymers and rubbers and is often blended with other plasticizers such as K-FLEX® DP (diethylene glycol dibenzoate).

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

PARALOID™ B-72 100% Resin has low reactivity with sensitive phosphorescent and luminescent pigments to produce stable, durable, non-yellowing coatings. It is compatible with vinyls, cellulosics, chlorinated rubbers, and silicones. It is well suited for white and metallic aerosols, clear coatings for wood, nitrocellulose modified coatings for general product finishing, pigment dispersion (fluorescent), flexographic printing inks, and gravure plastic coatings.

Dynasylan® F 8263 acts as a surface modifier on oxidic, carboxy- and hydroxyfunctional substrates (e.g. glass, ceramic). Dynasylan® F 8263 is a colorless liquid. It can be diluted in alcohols and various other organic solvents, e.g. n-hexane, xylol, acetone or ethyl acetate.

BONDERITE® S-FN 309 ACHESON (known as EMRALON 309) is a concentrated dispersion of PTFE fluorocarbon resin in an isopropyl alcohol carrier. BONDERITE® S-FN 309 ACHESON is designed to provide a fast-drying, low-friction coating when diluted or compounded as a lubricant. It provides good adhesion to many substrates including: wood, metal, rubber, plastic and glass. Moving parts wear longer, work harder and need less maintenance when coated with this product. As a “friction modifier” additive, it is conducive to most aerosol or coating formulations and can be applied by virtually all types of application methods.

Dynasylan® F 8261 is a bifunctional silane possessing hydrolyzable inorganic ethoxysilyl groups and a fluoroalkyl chain. Dynasylan® F 8261 acts as a surface modifier on mostly hydroxyfunctional substrates (e.g. glass, ceramic). It can also be used as an adhesion promoter between inorganic materials and fluoropolymers (PTFE, fluorosilicones etc.). Dynasylan® F 8261 is a colorless and odorless liquid. It can be diluted to a proportion of about 25 wt.-% in ethanol and various other organic solvents, e.g. n-hexane, xylene, acetone or ethyl acetate.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

Dynasylan® VPS 4721 is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows VPS 4721 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® VPS 4721 is a colorless liquid. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.