Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Product Code
- MITM11488
- Single Ingredient
- No
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Performance
- Very good cost/performance balance
- Tack free after physical drying
- Excellent compatibility with WB acrylics
- Good adhesion on glass and plastics
- Excellent dispersion stability
- Very good water release
- Good Anfeuerung.
UV/EB cured properties of CLEAR coatings based on UCECOAT® 2501 are characterized by the following performance properties:
UV/EB cured properties of WHITE coatings based on UCECOAT® 2501 are characterized by the following performance properties:
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
Properties
- Physical Form
Safety & Health
- Safety Information
Avoid contact with skin and eyes and breathing vapors. Direct contact with this material may cause minimal eye and skin irritation. Wash thoroughly after handling.
Packaging & Availability
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- The recommended storage temperature range for UCECOAT® 2501is ≥4°C (39°F) to ≤40°C (104°F). Protect the product from freezing. Avoid conditions that may expose the material to high temperatures. Protect from direct sunlight. Use with adequate ventilation. Keep container closed. After prolonged storage product can settle and may require agitation to re-disperse. This product is stable under normal conditions of handling and storage. UCECOAT® 2501 should not be stored for more than 1 year.
Other
- Appearance
- Milky white liquid
- Appearance (SDS)
- Translucent liquid
- Color (SDS)
- White
- Flammability (SDS)
- Non flammable
- Item Number
- Miscible in (SDS)
- Water, all proportions
- Odor (SDS)
- Mild
- Other Hazards
- Polymerization may occur from excessive heat ,contamination or exposure to direct sunlight ,Caution -Substance not yet fully tested . For research and development purposes only .
- Oxidizing Properties (SDS)
- None
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 7.0-8.5 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1.0 yr yr - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/mL g/mL At 25°C Particle Size max. 125.0 nm nm Viscosity max. 200.0 cPs cPs At 25°C - Material Composition
Value Units Test Method / Conditions Solid Content 40.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C °C Boiling Point (SDS) min. 100.0 °C °C Value for water Flash Point (SDS) min. 100.0 °C °C Flash Point (SDS) min. 100.0 °C °C non-Flammable Specific Gravity (SDS) 1.1-1.2 - at 20°C Vapor Density (SDS) min. 1.0 g/mL g/mL Air = 1 Vapor Pressure (SDS) 2.3 kPa kPa At 20°C Vapor Pressure (SDS) 2.3 kPa kPa At 20°C, Water Viscosity (SDS) 20.0-500.0 mPa.s mPa.s at 25°C, 50rpm, low viscous liquid Viscosity (SDS) 20.0-500.0 mPa.s mPa.s at 25°C RPM: 50 Low viscous liquid Volatile Content (SDS) 55.0-60.0 %(W/W) %(W/W) Water pH (SDS) 7.0-8.5 -