Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Code
- MITM04865
- RTU Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Features and Benefits
- Product Features:
- Stable colloidal suspension of PTFE
- Fine particle size distribution
- Lubricating, low friction PTFE particles
- White, translucent color
- Robust chemical and propellant compatibility
- Product Benefits:
- Minimal mixing costs for blending into your finished lubricant Provides cost-effective usage in finished lubricant to provide superior lubrication performance,
- consumer confidence and repeat sales
- Superior lubrication extends equipment life, reduces lubricant intervals and reduces maintenance costs
- Addresses consumer perception o clean lubrication, driving revenue with your formulated product
- Minimizes formulation costs for achieving stable and effective product
- Product Features:
Applications & Uses
- Application Area
- Compatible Substrates & Surfaces
- Markets
- Applications
- Application and Usage Information
- Product Application:
- Lubricant aerosol component
- Sealed systems
- Piano action parts
- Tools
- Solenoid plungers
- Storage bins
- Window guides
- Moving parts (wood, metal, fabric, plastic, rubber)
- Usage Information:
- Method of Use:
- Surface Preparation
- Prior to applying BONDERITE® S-FN 309 ACHESON the substrates to be coated should be clean, dry, and free of all contaminants and residues, such as dirt, grease, powder. A solvent wipe or vapor degreasing and air dry is usually sufficient; however, sandblasting, phosphating or chemical etching will generally increase adhesion and wear properties.
- Mixing and Dilution
- BONDERITE® S-FN 309 ACHESON is supplied in concentrated form. Agitate the concentrate to ensure uniform consistency. Continue stirring and slowly add the diluent. A dilution ratio of 1:3 (product:diluent) is suggested for initial evaluation. The best ratio for performance and economy is determined at the point of use.
- Note: A small amount of soft settling of the larger particles may occur during long periods of storage. Mild agitation will restore these particles back into suspension.
- Application
- Diluted BONDERITE® S-FN 309 ACHESON can be applied by conventional spray, brush, dip, or roller methods. Spraying provides the most uniform coverage of this product. Typical film thicknesses range from 0.2 to 0.5 mils. Always agitate thoroughly just before using the diluted BONDERITE® S-FN 309 ACHESON. Application during periods of high humidity may increase opacity or blush; exposure to strong sunlight may cause darkening.
- Surface Preparation
- Method of Use:
- Product Application:
Properties
- Physical Form
Packaging & Availability
Storage & Handling
- Storage and Shelf Life Information
- Shelf life is 12 months from date of qualification under original seal. Keep container tightly closed when not in use to avoid evaporation and contamination.
Other
- Autoignition Temperature (SDS)
- min. 398.0 °C
- Boiling Point (SDS)
- 82.3 °C
- Color (SDS)
- White, off white
- Coverage
- 8.1 m²/L
- Density
- 0.923 kg/L
- Evaporation Rate (SDS)
- 1.0 %
- Flash Point
- 11.7 °C
- Flash Point (SDS)
- 11.6 °C
- Group Principal Number
- S000218
- IATA/ICAO Proper Shipping Name
- Paint
- IATA/ICAO UN Number
- UN 1263
- IMO/IMDG Proper Shipping Name
- Paint
- IMO/IMDG UN Number
- UN 1263
- Item Number
- Lower Explosive Limit (SDS)
- 1.2 %
- Melting Point (SDS)
- -86.1 °C
- Odor (SDS)
- Solvent
- Particle Size
- 2.0-4.0 µm
- Principal
- Shelf Life
- 12.0 mo
- Solid Content
- 20.0 %
- Specific Gravity (SDS)
- 0.864-0.924
- USA/DOT Proper Shipping Name
- Paint
- USA/DOT UN Number
- UN1263
- Upper Explosion Limit (SDS)
- 12.0 %
- Vapor Pressure (SDS)
- 33.0 mm Hg
- Viscosity
- 25.0-50.0 mPa.s
- Viscosity (SDS)
- 20.0-50.0 cPs
- Volatile Organic Compounds (VOC)
- 683.0 g/L
- Volatile Organic Content (VOC) (SDS)
- 683.0 g/L
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 12.0 mo mo - Physical Properties
Value Units Test Method / Conditions Coverage 8.1 m²/L m²/L at 12.7 microns, 330 ft²/gal, 0.5 ml Density 0.923 kg/L kg/L At 25°C Flash Point 11.7 °C °C Particle Size 2.0-4.0 µm µm 90%, by volume Viscosity 25.0-50.0 mPa.s mPa.s At 25°C - Material Composition
Value Units Test Method / Conditions Solid Content 20.0 % % of PTFE Volatile Organic Compounds (VOC) 683.0 g/L g/L - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 398.0 °C °C Boiling Point (SDS) 82.3 °C °C Evaporation Rate (SDS) 1.0 % % Butyl acetate = 1 Flash Point (SDS) 11.6 °C °C Closed Cup Lower Explosive Limit (SDS) 1.2 % % Melting Point (SDS) -86.1 °C °C Specific Gravity (SDS) 0.864-0.924 - Upper Explosion Limit (SDS) 12.0 % % Vapor Pressure (SDS) 33.0 mm Hg mm Hg Viscosity (SDS) 20.0-50.0 cPs cPs Volatile Organic Content (VOC) (SDS) 683.0 g/L g/L