Products

AIRASE® 4500 is an effective defoamer concentrate based on organic polymer technology. Good balance of effectiveness and compatibility.

VERSAL YELLOW 4G is a pigment used in flexography, gravure printing, letterpress, and offset lithographic printing. It is compatible with nitrocellulose and is designed to enhance color in various printing applications.

VANCRYL® 989 is a high glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss and fast drying rates can be obtained by utilizing VANCRYL® 989 in inks and coatings. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 989 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with this product have good transfer, printability, and resolubility. Because it is a hard polymer, VANCRYL® 989 can also be formulated as a high gloss over print varnish with very good heat, water, oil, and scuff resistance.

TEGO® AIREX 944 shows excellent defoaming against both micro- and micro-foam. Suitable for a broad range of coating systems. Ideally suited for high-solid and 2K solvent-free formulations.

ORGASOL® 2001 UD NAT 2 is an ultrafine powder of polyamide 12, with a narrow article size distribution and nearly round particle shape.

Ceridust® 3620 is a micronized polyethylene wax.

VERSAL YELLOW 2GXS is a pigment used in flexography, gravure printing, letterpress, and offset lithographic printing. It is compatible with nitrocellulose and is designed to enhance color in various printing applications.

KRONOS® 2044 is a special pigment with a high level of inorganic surface treatment for heavily filled systems.

EBECRYL® 3420 is a low viscosity, modified epoxy acrylate with good pigment wetting ability. In UV offset, the final ink produced with this resin exhibits an enhanced ink water balance and good misting. EBECRYL® 3420 can be used to produce a UV flexo ink with good flow, high gloss and high reactivity.

TEGO® AIREX 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent borne, radiation-curing and high solids coatings and inks. Very suitable for high build and high viscosity applications.

KRONOS® 2064 is used for Printing Inks for maximum gloss and hiding power.

TEGO® AIREX 920 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown.

VANCRYL® 927 is a medium glass transition temperature acrylic emulsion for the graphic arts industry. Excellent gloss can be obtained by utilizing VANCRYL® 927 in inks and coatings. Its film formation properties, coupled with its rapid water release, result in very fast drying. It is suitable for both flexographic and gravure printing on paper substrates. VANCRYL® 927 has excellent compatibility with pigment dispersions and alcohols. Inks formulated with VANCRYL® 927 have good transfer, printability, and resolubility for high-quality printing on various paper substrates (including metalized paper) and aluminum foil. VANCRYL® 927 can also be formulated as a high gloss OPV that will very quickly develop water, oil, and scuff resistance.

VANCRYL® 65 is a medium molecular weight solid acrylic resin that is soluble in alkaline water solutions. Ammonia or other bases may be used as neutralizing agents. Co-solvents such as isopropanol are not required in making the solution, thus facilitating the preparation of low VOC inks and coatings. VANCRYL® 65 provides outstanding properties for high-solids gravure inks and waterborne clear overprint varnishes. The lower viscosity characteristics in solution of VANCRYL 65 allow the preparation of high solids inks and coatings, where high gloss and rapid drying are essential. Coatings prepared with VANCRYL® 65 have high gloss, scuff resistance, hardness, and excellent resolubility. VANCRYL® 65 is compatible with most acrylic and maleic resins. VANCRYL® 65 is also effective as a protective colloid in the production of styrene acrylic copolymer emulsions.

PARALOID™ B-72 100% Solid Grade Thermoplastic Acrylic Resin is a lower Tg (40°C) acrylic resin capable of forming softer films. The approximate hardness (KHN) is 10–11 compared to 12–13 for PARALOID™ B-66 Thermoplastic Solution Resin.