Products

MARLOWET® R 11 is a fatty acid polyethylene glycol ester

XIBOND® 375 is a reactive additive to improve the blend morphology of polymer blends; this additive is a random terpolymer of styrene, maleic anhydride and N-Phenylmaleimide.

DERTOPHENE® T is a light-colored and low VOC terpene phenolic resin compatible with acrylics, various elastomers and waxs. It allows to improve the performance of hot melt and solvent based adhesives such as specific adhesion and tack.

3M™ Ceramic Microspheres W-610 are unique, semi-transparent, white-colored, fine particle size, high-strength microspheres. These products are typically used to reduce VOC levels; increase filler loadings; improve hardness; and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to the ceramic chemistry of these products, they are also UV transparent down to 250 nm and have utility in radiation-curable and thin-film powder coatings.

XIBOND® 285 is a reactive additive to improve the blend morphology of polymer blends. This additive is a random copolymer of styrene and maleic anhydride.

MARLOX® RT 42 is one of the many low-foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi-linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 42 is a clear to slightly turbid liquid at room temperature and essentially 100% active.

LOTADER® 18603T is a reactive ethylene-methyl acrylate copolymer, it has been designed to coextrusion application with polyethylene, ethylene copolymers, polyamides, EVOH, PET and PS. It can also be used as a coupling agents for HFFR compounds as well as impact modifiers for polyamides. LOTADER® 18603T is compatible with most tackifying resins and waxes and can be used in hot melt adhesives formulations. LOTADER® 18603T is also suitable to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminum, foils.

LOTADER® 4613T is a random ethylene - methyl acrylate - maleic anhydride terpolymer. LOTADER® 4613T is an ultra-versatile ready-to-use tie layer resin for extrusion lamination/coating, not intended to be diluted. LOTADER® 4613T provides excellent adhesion in direct bonding onto printed, reverse-printed and plain films (OPET, OPP, CPP, OPA). LOTADER® 4613T for extrusion coating lamination onto foil, metallized films, paper and board.

LOTADER® 9304T is a random ethylene-vinyl acetate-maleic anhydride terpolymer (EVA-MAH). As an ethylene copolymer, LOTADER® 9304T is compatible with PE in all proportions and with most ethylene copolymers. Vinyl acetate brings softness, flexibility, and polarity while maleic anhydride brings reactivity, leading to versatile adhesive properties to polar and non-polar substrates. As a result of high-pressure polymerization in a tubular reactor, LOTADER® 9304T also exhibits high transparency (low haze). LOTADER® 9304T is compatible with most tackifying resins and waxes and can be used in hot melt adhesives formulations. LOTADER® 9304T is also suitable to produce thermo-adhesive films for solid substrates like PA, PET and PU films, aluminum foils, fiber mats, foams. LOTADER® 9304T can also be used as a tie layer between polyethylene and polyamide in blown film co-extrusion.

Hybase® C-311 is a 300 TBN oil soluble overbased calcium sulfonate. Hybase® C-311 is a typically used as a detergent and rust inhibitor in crankcase lubricants. It can be used as the sole detergent but will also work well in conjunction with other detergent types, such as calcium phenate.

ZINC STEARATE RSN 131 HS GRANULAR CODE 8512 is a high bulk density, free-flowing granular powder.

VINSOL® NVX resinate is the sodium soap of Vinsol resin, a dark, high melting, thermoplastic, acidic resin. It is produced in an aqueous reaction of Vinsol resin with caustic soda (sodium hydroxide) followed by processing in a spray dryer. It is a light tan, free flowing powder.