Products

Rostabil TPP is an antioxidant and thermal stabilizer used in paints and coatings and plastics and elastomers. It is suitable for transesterification processes and functions as a heat stabilizer and general stabilizer.

RHOPLEX® AC-464 is a binder and resin used in waterborne paint applications, functioning as a binder.

Rostabil DPDP is an antioxidant and thermal stabilizer used in plastics and elastomers. It functions as a heat stabilizer and general stabilizer.

PARALOID™ B-82 51% Resin is a softer, general purpose acrylic resin. Films based on PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) exhibit the water-white color, durability, flexibility and chemical resistance characteristic of acrylic polymers. PARALOID™ B-82 51% Resin Thermoplastic Solution Resin (51%) is well suited for general product finishing where a softer resin is required. It can be used over metal, plastics, wood and masonry.

Rostabil TDP is an antioxidant and stabilizer used in chemical manufacturing, paints and coatings, and plastics and elastomers. It is suitable for transesterification processes.

PARALOID™ B-72 100% Resin is a general purpose, low cost acrylic resin that retains the outstanding characteristics of acrylic resins, such as transparency, durability, flexibility, and resistance characteristics. PARALOID™ B-82 Solid Grade Thermoplastic Acrylic Resin is also available at 51% solids in Toluene.

PARALOID™ A-21LV 30% Resin is a very hard methyl methacrylate polymer with enhanced adhesion properties. It is supplied as a 30% solution in a toluene/MEK/butanol solvent system. The polymer is also available in solid grade form. PARALOID™ A-21LV 30% Resin is similar to PARALOID™ A-21LV 30% Resin in characteristics and uses but because of its solvent system, PARALOID™ A-21LV 30% Resin possesses better compatibility with cellulosics, such as nitrocellulose and cellulose acetate butyrate. PARALOID™ A-21LV 30% Resin also will allow a higher solids content at spray viscosity.

MAINCOTE™ AE-58 is an aqueous acrylic emulsion copolymer which can be crosslinked with waterborne dispersions of epoxy resin in two-component acrylic/epoxy coatings. The resulting acrylic/epoxy coatings have properties such as low VOC, long pot life, and outstanding hardness, UV durability and solvent/chemical resistance. The high performance coatings can be used in a variety of interior and exterior applications for metal and concrete surfaces, such as institutional wall coatings and industrial metal primers, topcoats and direct-to-metal (DTM) coatings.

RHOBARR™ 214 is a binder and resin used in paper and paperboard coating applications. It provides blocking resistance, excellent stability, fat and grease resistance, good barrier properties, heat sealability, low coefficient of friction, and resistance to mineral oil, oil, plasticizers, and water.

Rostabil TNF is an antioxidant and thermal stabilizer used in lubricants and functional fluids, paints and coatings, and plastics and elastomers. It functions as a heat stabilizer and general stabilizer.

PARALOID™ AU-608S Resin are acrylic polyols specifically designed to produce hard, resistant, durable coatings when reacted with aliphatic isocyanates. The exceptional properties of these coatings have led to increased use in such heavy duty maintenance applications as chemical plant storage tanks and offshore rigs and platforms.

RHOPLEX® WL-51 is ideal for high-performance waterborne finishes for coating plastic substrates, such as those used for business machines and office equipment. RHOPLEX® WL-51 is recommended for use on the following plastics: acrylonitrile/butadiene/styrene, polycarbonate, polyphenylene oxide, polyvinyl chloride, acrylic, polystyrene, high-impact polystyrene, polypropylene, and pre-treated thermoplastic polyolefin. RHOPLEX® WL-51 delivers an outstanding combination of application, durability, and appearance benefits that make it an excellent choice for demanding business and office applications.

MAINCOTE™ EC-11 is an acrylic polymer recommended for use in elastomeric coatings for industrial maintenance applications on both metal and cementitious substrates. When formulated as an anti-corrosive coating, MAINCOTE™ EC-11 Acrylic Emulsion can be applied to both clean and marginally-prepared rusty steel, and imparts excellent corrosion resistance, adhesion, low temperature flexibility and dirt pickup resistance. When applied to concrete surfaces, MAINCOTE™ EC-11 Acrylic Emulsion provides excellent resistance to blistering and the stresses imparted by thermal cycling. It is especially useful in applications where prevention of spalling and scaling of the concrete surface, caused by exposure to water and deicing chemicals, is required. The proper formulation and elastomeric nature of MAINCOTE™ EC-11 Acrylic Emulsion facilitates the production of coatings with excellent flexibility, very low VOC levels (< 50 g/L), and the ability to be applied in thick films (e.g., 10-20 mils dry) without sagging or mudcracking.

ACRYSOL™ TT-615 is an alkali swellable acrylic polymer emulsion used as either a primary or ancillary thickener in coatings. This product exhibits viscosity build comparable to high molecular weight HEC thickeners at low shear levels. Viscosity is developed by neutralization to a pH of 7 to 10. ACRYSOL™ TT-615 demonstrates greater roller spatter resistance than the cellulostics, but with a more pseudoplastic rheology profile. The liquid physical form of ACRYSOL™ TT-615 facilitates its incorporation into grinds and letdowns.

ACRYSOL™ RM-12W is a solvent-free, nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. Unlike conventional thickeners, ACRYSOL™ RM-12W offers excellent sag resistance with minimal effect on flow and leveling. While not capable of providing true thixotropy, it can offer advantages typical of thixotropes. These properties include improved brush/roller loading, good anti-drip properties, good in-can structure, and excellent flow, sag balance.