Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Product Code
- MITM04036
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
Applications & Uses
- Compatible Substrates & Surfaces
Properties
- Physical Form
- Note
Drying the coatings at 300°F for 30 minutes simulates final properties of the resin.
- The white lacquers were formulated at a titanium dioxide/binder ratio (solids basis) of 30/70. The properties were determined after coatings were sprayed on Bonderite 1000 solution.
- The degree of flaking at the scribed cross hatch is rated on a 0 (no failure) to 5 (complete lift off) scale.
- The degree of cracking at the bend over each mandrel is rated on a 0 (no failure) to 10 (complete flaking) scale.
Technical Details & Test Data
- Properties in White Lacquers
Tukon Hardness Whiteness (K Color Low Numbers Best)
Cross Hatch³ 30 min. at 180°F 3.7 30 min. at 300°F 7.7 30 min. at 180°F 0 30 min. at 300°F 12.6 16 hrs. at 350°F 15.5 30 min. at 300°F 0 Pencil Hardness Flexibility, "1/8,1/4, 1/2 Mandrels⁴ Mustard Staining (30 min. Exposure) 30 min. at 180°F H 30 min. at 180°F 1,1,1 30 min. at 180°F Moderate 30 min. at 300°F H 30 min. at 300°F 4,4,3 30 min. at 300°F Moderate Gloss, 20° Printing, 2 psi for 1 hr. at 140°F Gasoline Resistance (15 min. Exposure)
30 min. at 180°F 81 30 min. at 180°F Extra Heavy 30 min. at 180°F Wipes off 30 min. at 300°F 79 30 min. at 300°F Very Heavy 30 min. at 300°F Wipes off Gloss, 60° Knife Adhesion Spray Conditions 30 min. at 180°F 93 30 min. at 180°F Very Good Viscosity, #4 Ford Cup, sec. 15 30 min. at 300°F 92 30 min. at 300°F Very Good Solids Content, % 27
Packaging & Availability
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
- Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge.
- Processing or operating at temperatures near or above product flashpoint may pose a fire hazard.
- Use appropriate grounding and bonding techniques to manage static discharge hazards.
- Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used.
- Store products in tightly closed original containers at temperatures recommended on the product label.
Other
- ADR/RID/ADN Proper Shipping Name
- Not Regulated
- ADR/RID/ADN UN Number
- Not Applicable
- Color (SDS)
- Clear
- Flammable Nature (SDS)
- May form combustible dust concentrations in air during processing, handling or other means
- IATA/ICAO Proper Shipping Name
- Not Regulated
- IATA/ICAO UN Number
- Not Applicable
- IMO/IMDG Proper Shipping Name
- Not Regulated
- IMO/IMDG UN Number
- Not Applicable
- Item Number
- Odor (SDS)
- Acrylic odor
- Other Hazards
- This product contains no substances assessed to be PBT or vPvB at levels of 0.1% or higher.
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 360.0 d d - Mechanical Properties
Value Units Test Method / Conditions Ultimate Hardness 10.0-11.0 KHN KHN - Physical Properties
Value Units Test Method / Conditions Bulk Density 9.7 lb/gal lb/gal At 25°C Glass Transition Temperature (Tg) 35.0 °C °C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) 393.0 °C °C Liquid Density (SDS) 0.66 g/cm³ g/cm³ Volatile Content (SDS) 1.0 % %