Products

WANNATE® HT-80BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in of 20% n-butyl acetate and solvent naphtha 100 (1:1), colorless to slightly yellowish clear liquid.

D.E.R.® 662E is a low molecular weight "2-type" epoxy resin.

SURFYNOL® 104 E is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

Europrene® SOL TH 2315 is a linear block copolymer obtained by selective hydrogenation of styrene - butadiene-styrene block copolymers. The polymer is based on styrene and ethylene/butylene, where bound styrene content is 32%wt. A non-staining, TNPP free antioxidant system is added during the production process.

TEGO® Foamex 805 N is a very compatible defoamer emulsion based on polyether siloxane technology. Highly suitable for post-addition.

Precipitated Silica is a general term for white powder X ray amorphous silica and silicate products. It mainly refers to Precipitated Silica, fumed silica and ultrafine silica gel, and also includes powdered synthetic aluminum silicate and calcium silicate. Silica is a porous material and its composition can be expressed by SiO2.nH2O, in which nH20 exists in the form of surface hydroxyl. Soluble in caustic soda and hydrofluoric acid, insoluble in water, solvents and acids (except hydrofluoric acid), high temperature resistant, nonflammable, tasteless, odorless, with good electrical insulation.

EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. EBECRYL® LED 03 when combined with an appropriate photoinitiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED03 exhibit a low odor after UV or EB curing.

Toyal SP75-100 is used in aerospace and aviation, aerospace coatings, ceramics and refractory markets. It is applicable in metallurgy processes.

BONDERITE® S-FN 330 ACHESON offers clean, dry, long lasting, solvent resistant lubrication for sliding, rubbing or rolling surfaces. BONDERITE® S-FN 330 ACHESON is a resin-bonded PTFE lubricant supplied as one component in ready-for-use form. Its low temperature cure of 50°C (300°F) does not affect heat-sensitive substrates such as light metals, wood, rubber and some plastics. The extremely thin coating of BONDERITE® S-FN 330 ACHESON necessary to achieve maximum lubrication (from 0.0003 to 0.0007 inch, or 0.008 to 0.018 millimeter) allows post-treatment of parts while maintaining original part dimensions without redesign. In many cases, BONDERITE® S-FN 330 ACHESON coating can replace metal plating or finishing and offers improved performance at lower cost.

RHOPLEX® TR-25 is a chemical mixture and blend functioning as a binder and resin. It is used primarily as a binder.

Agimid® 240 B120 is a plasticized, heat and light stabilized and impact modified product for extrusion. The main application is pneumatic tubes for industrial and automotive markets.

Lobase® C4503 is a 30 TBN oil soluble neutral calcium sulfonate. It is a general purpose neutral calcium sulfonate typically used as a detergent and rust inhibitor in crankcase lubricants. It is compatible with most mineral base oils, white oils, and synthetic base stocks.

Hatcol® 2999 is a pure polyol ester base stock based on pentaerythritol offering excellent high temperature stability with very high lubricity and low volatility.

WANNATE® HT-90BS is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 10% of n-butyl acetate and solvent naphtha 100 (1:1) mixed solvent, colorless to slightly yellowish clear liquid.