Products

EBECRYL® 286 is an aliphatic urethane diacrylate oligomer diluted 25% with tripropylene glycol diacrylate (TPGDA) monomer. Films of EBECRYL® 286 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.

EBECRYL® 4849 is an aromatic urethane diacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 4849 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and abrasion resistance.

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings.

UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications, giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB).

EBECRYL® 375 is a tetramercapto derivative designed as adhesion promotor on metal. It is used in a concentration of 2-10 % in acrylated systems to improve adhesion and flexibility.

UCECOAT® 7630 is an energy curable polyurethane dispersion which is tack-free after water evaporation. It has been developed for wood coatings but can also be used for other applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. Because of its non-irritant nature and low viscosity, it can be applied safely by spray coating and curtain coating.

EBECRYL®1291 is a hexafunctional aliphatic urethane acrylate oligomer which provides extremely fast cure response when exposed to ultraviolet light (UV) or electron beam (EB). Cured films of EBECRYL®1291 exhibit high hardness, abrasion and solvent resistance.

VANCRYL® 950 emulsion is a very low Tg acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 950 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 950 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 950 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.48.

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

EBECRYL® 53 is a purified grade of OTA 480, especially developed for formulating ultraviolet light (UV) and electron beam (EB) curable printing inks and overprint varnishes for food packaging applications. The purification process removes impurities that are potential sources for odor and extractables in cured products.

VANCRYL® 800 is a styrene/acrylic copolymer used in waterborne inks and coatings for graphic arts applications. VANCRYL® 800 provides pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with VANCRYL 800 are excellent. VANCRYL® 800 is also effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.

NPG(PO)2DA is useful as a reactive diluent in formulating ultraviolet light (UV) and electron beam (EB) curable coatings and inks. NPG(PO)2DA provides efficient viscosity reduction of viscous resins, good flow and wetting, and greater flexibility than other common difunctional acrylate diluents.

EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.