Products

EBECRYL® 436 is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA)(1). EBECRYL® 436 exhibits good lithographic behavior and pigment wetting properties, and fast cure response in ultraviolet light (UV) curable coatings and inks. Cured films of EBECRYL® 436 display good adhesion to metals, plastics and paper.

VANCRYL® 950 emulsion is a very low Tg acrylic polymer designed for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. VANCRYL® 950 also has the unusual combined properties of excellent resolubility and fast drying. These properties are needed when converting flexible packaging printing from solvent-based to water-based formulations. VANCRYL® 950 emulsion is compatible with VANCRYL® 68 pigment dispersions as well as other commonly used pigment dispersions. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, alcohols, and waxes. VANCRYL® 950 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.48.

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

EBECRYL® 53 is a purified grade of OTA 480, especially developed for formulating ultraviolet light (UV) and electron beam (EB) curable printing inks and overprint varnishes for food packaging applications. The purification process removes impurities that are potential sources for odor and extractables in cured products.

EBECRYL® 605 is a bisphenol A epoxy diacrylate diluted approximately 27% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) to provide a lower viscosity, easier handling product. EBECRYL 605 exhibits light color and fast cure response. Films of EBECRYL 605 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness and superior chemical resistance.

EBECRYL® 4201 is an undiluted aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance.

EBECRYL® 8808 is an undiluted aliphatic urethane diacrylate. Since the oligomer is undiluted, more formulating latitude is possible. Films of EBECRYL® 8808 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and resistance to yellowing.

EBECRYL® 4765 is an isocyanate functional aliphatic urethane acrylate supplied in ethyl acetate and designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal.

EBECRYL® 4266 is a Unsaturated aromatic epoxy acrylate. In the formulation of UV-curing and EB coatings. Without reactive thinner.

EBECRYL® P39 is a polymeric benzophenone derivative that functions as the photosensitizer in hydrogen abstraction type radical photoinitiator systems. EBECRYL® P39 has been designed for use in the formulation of UV coatings that exhibit little or no odor after curing. Recommended levels are from 8 to 10% based on total formulation. EBECRYL® P39 should be used in combination with amine co-initiators such as EBECRYL® P115 or EBECRYL® 7100, or with amine modified acrylate resins. EBECRYL® P39 is a polymer preparation manufactured in the European Union with (pre)registered monomers/reactants and REACH compliant.

EBECRYL® 1606 is a bisphenol A epoxy diacrylate diluted with 20-25% of trimethylolpropane triacrylate (TMPTA)(1) monomer. EBECRYL® 1606 is characterized by its light color, low odour and fast cure response. Films of EBECRYL® 1606 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin.

PETIA is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. PETIA is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. PETIA has a higher ratio of tri - to tetra-acrylate ester than the similar product EBECRYL 180, and therefore remains liquid at normal ambient temperatures.

UCECOAT® 7733 is a UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while still giving flexibility.