Products

Flexricin® P-8 is a highly efficient plasticizer having very low volatility. It has excellent electrical properties, extrusion lubricity and heat stability. It is used in vinyl wire- jacketing, semi-rigid vinyls and flexible nitrocellulose lacquers.

TRIGLYCIDYL ISOCYANURATE (TGIC) JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

MAGNESIUM STEARATE SW/F/1 VEG - US is a low to medium bulk density, fine white powder.

BS-1C-A25 is a new composite clay suitable for using in a broad range of coatings systems including epoxies and unsaturated polyesters. BS-1C-A25 imparts excellent sag resistance, thixotropy and suspension property.

GENIOPLAST® FLUID 220 is a clear, colorless and odorless liquid.

Baerostab® BZ 8785 - US is a Zn liquid stabilizer and kicker.

BAYPLAST® YELLOW 5GN 01/P is an Azo complex.

CALCIUM STEARATE VSA-325 is a low bulk density, very fine, white powder.

B 4011 is a liquid Bio-plasticizer for PVC.

POLYGLYKOL B 11/150 K is a lubricating agent used in fluids and lubricants, particularly in metal processing and metalworking fluids applications.

Exolit® AP 750 is a non-halogenated flame retardant based on ammonium polyphosphate as main component, which develops its effectiveness through phosphorus/nitrogen synergism. In contrast to similar competitive material, it shows high processing stability. Exolit® AP 750 differs in its mode of action from non phosphorus-based flame retardants (e. g. brominated, chlorinated or mineral FRs like ATH) by achieving its effect through intumescence. Material containing Exolit® AP 750 will foam on exposure to flame. The carbon-rich foam layer so formed will protect the polymer and in many cases the substrate below through its heat insulating effect, reduces further oxygen access and prevents dripping in case of a thermoplastic based formulation. Beyond the primary effects on fire behavior such as reduction of flame propagation rate, rate of heat release, dripping behavior, residual lengths of test specimens after flame tests etc., positive secondary fire effects such as low smoke density, no release of corrosive off-gasses, lower formation of toxic smoke gasses are of great interest.

Pale 4 polymerized castor oil oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents. Pale 4 polymerized castor oil is used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. It is a processing aid and plasticizer for rubber polymers.