Products

BONDERITE® L-GP M 210 is a colloidal dispersion of molybdenum disulfide in alcohol. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) offers excellent extreme-pressure lubrication in a resin-bonded system that air dries in five to ten minutes. The material is easily applied by standard spray, brush, or dip methods to all substrates not affected by the fluid component. BONDERITE® L-GP M 210 ACHESON (known as MOLYDAG 210) is supplied as a concentrate to be used as is or diluted in appropriate solvent for final application.

Bluesil™ EMUL 3500 is a general purpose non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane.

BONDERITE® L-FG EB-012 is a conductive coating product in liquid form. It is designed for applications requiring conductive properties.

Sorb-It® 1 UNIT TY-515A SAP3887 is a desiccant used in packaging and industrial additives for packaging materials.

BONDERITE® S-FN 333 is a blend of fluorocarbon lubricants in an organic resin binder and solvent system designed for applications beyond the scope of conventional fluorocarbon coatings. Its low coefficient of friction, hardness, adhesion, resiliency, and cure conditions allow application of BONDERITE® S-FN 333 in a multitude of places where pure sintered PTFE coatings are unsuitable. Coatings of BONDERITE® S-FN 333 wear longer than pure PTFE, offer superior chemical resistance, and can be repaired without removing the existing coating. BONDERITE® S-FN 333 combines the toughness of the support resin with the surface properties of pure PTFE.

BONDERITE® S-FN 109B is one of a series of coatings designed to provide controlled electrical properties. BONDERITE® S-FN 109B is a dispersion of finely divided graphite in a thermoplastic resin. This product rapidly air dries to form a flexible conductive coating. It is designed to be applied by typical spray or printing techniques. The flexibility of this product makes it an excellent choice for coating plastic as well as metal. BONDERITE® S-FN 109B is tested for 11 elemental impurities. The high purity level of BONDERITE® S-FN 109B makes for a highly conductive, flexible coating.

BONDERITE® L-GP 154, a specially processed colloidal graphite dry film lubricant, air dries rapidly at room temperature and adheres tenaciously to most substrates with minimum surface preparation. The thinness of the coating, coupled with high lubricity, provides clean, long wearing lubrication without redesign of component dimensions. Coatings are easily applied during manufacture or assembly by standard spray, brush, or dip techniques. BONDERITE L-GP 154 ACHESON is also an easy-to-apply resistance coating designed to provide conductivity, and excellent release properties to many nonconductive substrates, including most plastics. BONDERITE L-GP 154 ACHESON has been specified throughout the electronics industry in a multitude of roles. It can easily be blended with BONDERITE L-GP M 210 ACHESON (molybdenum disulfide insulating coating) to attain cost-effective sheet resistance variations.

BONDERITE® S-FN 309 ACHESON (known as EMRALON 309) is a concentrated dispersion of PTFE fluorocarbon resin in an isopropyl alcohol carrier. BONDERITE® S-FN 309 ACHESON is designed to provide a fast-drying, low-friction coating when diluted or compounded as a lubricant. It provides good adhesion to many substrates including: wood, metal, rubber, plastic and glass. Moving parts wear longer, work harder and need less maintenance when coated with this product. As a “friction modifier” additive, it is conducive to most aerosol or coating formulations and can be applied by virtually all types of application methods.

BONDERITE® S-FN 213 ACHESON is designed to provide controlled electrical resistance properties. BONDERITE® S-FN 213 ACHESON is a dispersion of finely divided graphite pigment in an epoxy resin solution. When properly cured, it has excellent adhesion to epoxy circuit boards, bushings, plastics and ceramics. BONDERITE® S-FN 213 ACHESON also has excellent wearing properties. It provides chemical resistance to oils and many solvents, but not to enamel strippers. BONDERITE® S-FN 213 ACHESON as a lubricant coating provides clean, dry, long-wearing, and superior maintenance-free lubrication for a wide range of light to medium load applications. A thin film of BONDERITE® S-FN 213 ACHESON keeps wear uniform and reduces friction on mating metal parts without requiring increased manufacturing tolerances. Components are protected from metal-to-metal contact even in applications approaching boundary lubrication, reducing the risk of damage due to partial or complete seizure. Formulated from processed micro-graphite and epoxy resin, BONDERITE® S-FN 213 ACHESON forms tightly adherent coatings on many types of substrates. In addition to high lubricity, BONDERITE® S-FN 213 ACHESON coatings exhibit extremely good wear resistance to oils and solvents (except enamel strippers).

BONDERITE® L-CA PF 404 ACHESON (known as PF 404) is a blend of ultra-fine graphite particles dispersed in a water-extendible solution. Specifically designed for continuous casting, BONDERITE® L-CA PF 404 ACHESON (known as PF 404) provides excellent release, superior tooling protection and high temperature wetting characteristics on copper/bronze dam blocks. Its unique formulation minimizes gassing which compounds porosity levels. BONDERITE® L-CA PF 404 ACHESON (known as PF 404) does not build up and is easily washed from the dam block surface.

BONDERITE® S-AD 197 is a concentrated dispersion of extremely high purity colloidal graphite in a water-insoluble polyalkalene glycol. It provides superior fluid lubrication in extreme temperature, high stress environments that carbonize petroleum oils. If temperatures rise to the point that the polyalkalene glycol volatilizes, an adherent film of graphite remains on the wear surface to maintain a low coefficient of friction and prevent metal-to-metal contact. BONDERITE® S-AD 197 is specially formulated and unequaled in its ability to resist settling out.

BONDERITE® S-FN EB-012 ACHESON is one in a series of conductive coatings designed to provide controlled electrical properties. BONDERITE® S-FN EB-012 ACHESON is an application versatile, single component, water based dispersion of graphite in a thermoplastic binder that offers an extremely flexible coating with low resistance at a low cure temperature. The coating will provide a conductive, chemical-resistant coating that will withstand the environment inside of a lithium-ion polymer battery. With proper dilution, BONDERITE® S-FN EB-012 ACHESON can be applied by spray, brush, roll, or print methods. Once properly cured, the coating provides a tenacious, chemical and solvent resistant coating for most metal substrates.

Bluesil™ FLD 47 V350 is straight chained polydimethylsiloxanic fluids.

Dynasylan® AMMO is a bifunctional organosilane possessing a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMMO to bind chemically to both inorganic materials (e.g. glass, metals fillers) and organic polymers (e.g. thermosets, thermoplastics and elastomers), thus functioning as an adhesion promoter and a surface modifier. Dynasylan® AMMO is a clear, colorless liquid having an amine­like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons.

Bluesil™ FLD 47 V50 is straight chained polydimethylsiloxanic fluids.