BONDERITE® L-AD M 200

With constant use, BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) produces a durable, mirror-like film of MoS2 on mating surfaces for effective lubrication up to 750°F (399°C)--and higher in the absence of air. This solid MoS2 film enables the oil to spread and renew interrupted films quickly to prevent any metal-to-metal contact.

Dilution

BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) can be blended with most commercially available oils or greases. The services of Henkel laboratories are available to advise and/or evaluate the compatibility of BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) with proposed diluents. BONDERITE L-AD M 200 ACHESON (known as MOLYDAG 200) is completely compatible with most oil or grease additive treatments.

In blending operations involving large quantities, the oil should be heated to about 150°F (66°C) since blending is more efficient when oil viscosities are reduced. Stir the Molydag® 200 thoroughly to achieve a uniform consistency, then pre-mix equal parts of BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) and the oil diluent before blending with the balance of the oil. Maintain continuous agitation by mechanical stirring or dry air blowing throughout the blending operation.

Application

For best results, use BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) at 1% solids by weight in the finished lubricant, or use approximately 6.7% product by weight of BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200). Blended BONDERITE® L-AD M 200 ACHESON (known as MOLYDAG 200) can be applied by any of the conventional methods: brush, dip-tank, drip, or spray.