Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Carrier
- Chemical Family
- Function
- Light Stabilizer, UV Absorber
- Product Code
- MITM12151
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Benefits
- Synergistic solution UV Absorber (BZT) + HALS for waterborne clearcoats.
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Markets
- Applications
- Product Applications
- Hostavin® DISP can be used in all kind of waterborne coatings, air drying and stoving enamels.
- It is especially recommended for UV stabilization of waterborne exterior wood coatings.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Principal Information
- Group Principal Number
- S000004
- Principal
Storage & Handling
- Storage Conditions
- Storage temperatures above +40°C and below + 4°C must be avoided.
- This product tends to sediment out and the dispersion should thus always be well stirred prior to use.
- Minimum shelf life is 3 years from the date of shipping when properly stored, in its original sealed containers.
Other
- Appearance
- Slightly yellowish milky liquid
- Appearance (SDS)
- Dispersion
- Color (SDS)
- White to light yellow
- Explosive Nature (SDS)
- Non explosive
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO UN Number
- UN 3082
- IMO/IMDG EmS Fire
- F - A
- IMO/IMDG EmS Spill
- S - F
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG UN Number
- UN 3082
- Miscible in (SDS)
- Water
- Other Hazards
- No additional hazards are known except those derived from the labelling
- USA/DOT UN Number
- Not Applicable
- Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 3.0 yr - Material Composition
Value Units Test Method / Conditions Hindered Amine Light Stabilizer Content 52.0 % - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 212.0 °F Differential Scanning Calorimetry at 101.3kPa Density (SDS) 1.05-1.1 g/cm³ Flash Point (SDS) min. 212.0 °F Viscosity (SDS) 800.0 mPa.s pH (SDS) 7.5-8.5 -