Products

BONDERITE® L-FM M 20A ACHESON is a unique, water based, molybdenum disulfide billet coating designed for use when cold extruding ferrous metals. It forms an excellent lubricating film over zinc and manganese phosphated substrates. BONDERITE L-FM M 20A ACHESON adheres extremely well in mechanical feed mechanisms and moves with the billet surface during deformation, enabling higher production rates and extreme area reductions. It also eliminates the expense and housekeeping problems associated with tumble-applied MoS2 powder.

BONDERITE® L-CA PF 404 ACHESON (known as PF 404) is a blend of ultra-fine graphite particles dispersed in a water-extendible solution. Specifically designed for continuous casting, BONDERITE® L-CA PF 404 ACHESON (known as PF 404) provides excellent release, superior tooling protection and high temperature wetting characteristics on copper/bronze dam blocks. Its unique formulation minimizes gassing which compounds porosity levels. BONDERITE® L-CA PF 404 ACHESON (known as PF 404) does not build up and is easily washed from the dam block surface.

CYMEL® 373 resin is a partially methylated melamine supplied in water. Its high reactivity combined with water solubility makes CYMEL® 373 resin suitable for a wide range of fast-curing waterborne industrial coating formulations.

UCECOAT® 7230 is a UV/EB energy curable polyurethane dispersion with low tack before cure and after water evaporation. It has been developed for high hardness top coats on plastics, wood and other substrates, including both transparent and pigmented. UCECOAT® 7230 demonstrates high reactivity, good compatibility and good colloidal stability. The cured coating exhibits high gloss and very high hardness, abrasion resistance, chemical resistance, as well as good adhesion on plastics.

CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes CYMEL® 328 resin suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications

Silcolapse® 723 is a non-ionic aqueous 30% active silicone antifoam and/or defoamer. It offers excellent antifoam and defoaming properties in a wide variety of aqueous applications including those with incidental food contact as well as food processing applications. Silcolapse® 723 effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures. Silcolapse® 723 gives good results at wide-ranging pH and provides a cost effective solution where foam is a problem.

UCECOAT® 7700 is a tin-free version of UCECOAT® 7699, a high performance acrylated polyurethane dispersion specifically developed for energy curable pigmented top-coats on wood furniture. It is also suited for clear finishes on wood along with other substrates and applications, such as field applied UV curable coatings for wood, concrete, VCT (vinyl composition tile), and resilient floors. UCECOAT® 7700 demonstrates high reactivity, including in thick pigmented coatings, and cured coatings exhibit outstanding scratch and stain resistance.

Polyfill 402SM is a alumina trihydrate and leading flame retardant and smoke suppressant product used in a wide range of industrial applications.

UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT® 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT® 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex.

ACRYSOL™ ASE-75 Thickener is an acid containing, acrylic emulsion copolymer. When the emulsion is diluted with water and neutralized with a base, each emulsion particle swells greatly. The emulsion clarifies under these conditions and becomes highly viscous. ACRYSOL™ ASE-75 Thickener is effective in improving mid to low shear rate (Brookfield) viscosity, resulting in coatings that have highly shear thinning characteristics.

BONDERITE® L-FG F 31 is the world’s most widely used forging die lubricant. It contains a unique graphite particle size and configuration, along with a special stabilizer and binder system. These properties produce excellent lubricity and release, faster wetting, higher dilution ratios and longer die life.

WC-481566 Yellow Shade Green is a water-based acrylic resin pigment dispersion that offers low VOC (<35 g/L). It is formulated with a styrenated acrylic resin solution and features a low viscosity, allowing for high pigment loadings while remaining easily pourable.

UCECOAT® 7849 is a radiation curable polyurethane dispersion which is tack- free before cure and after water evaporation. It was developed for wood coatings, but can also be used for other applications. Because of its non- irritant nature and low viscosity, it and can be applied safely by spray coating and curtain coating.