Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Country of Origin
- Product Code
- MITM12472
- Product Functions
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Product End Uses
- Processing Information
LOTADER® 4513T can be extruded with standard polyolefin extrusion equipment with typical melt temperature of 290°C and up to 320°C. LDPE purge is recommended before extruder shutdown.
Properties
Regulatory & Compliance
- Compliance (Regulatory)
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002377
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- LOTADER® 4513T is usually packed in waterproof bags or rigid containers with waterproof liner. It should be stored in dry conditions and be kept out of moisture in an aerated building.
- Improper storage conditions may cause degradation and could have consequences on physical properties of the product. It is recommended to reseal the bag or the liner after use to protect LOTADER® 4513T against moisture.
- Shelf life is three years from the date of delivery, in unopened packaging.
Other
- Color (SDS)
- Natural color
- Insoluble in (SDS)
- Water
- Item Number
- Material Compatibility
- Odor (SDS)
- Slightly acrylic
- Other Hazards
- Does not contain PBT and/or vPvB substances ≥ 0.1% assessed according to Annex XIII of REACH
- Processing & Application Methods
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Material Composition
Value Units Test Method / Conditions Maleic Anhydride Content 0.3 %(W/W) Fourier Transform Infrared Spectroscopy (FTIR) Methyl Acrylate Content 24.0 %(W/W) Fourier Transform Infrared Spectroscopy (FTIR) - Physical Properties
Value Units Test Method / Conditions Density 0.95 g/cm³ ISO 1183 Density 0.95 g/cm³ ASTM D1505 Melt Flow Index 8.0 g/10min ASTM D1238 at 190°C, 2.16kg Melt Flow Index 8.0 g/10min ISO 1133 at 190°C, 2.16kg Melting Point 96.0 °C ISO 11357-3 Softening Point 41.0 °C ASTM D1525 10N Softening Point 41.0 °C ISO 306 10N - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) min. 662.0 °F Density (SDS) 950.0 kg/m³ Melting Point (SDS) 96.0 °C Softening Point (SDS) 41.0 °C Vicat Softening Point Test - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 3.0 yr