Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Cleaning Ingredients Functions
- Fluids & Lubricants Functions
- Industrial Additives Functions
- Product Code
- MITM16291
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- HII Features
- Industrial Additives Features
- Product Benefits
- Foam Control
- Wetting Agent
- Thermal Stability
- Chemical Stability
- Good Steric Stabilization
- Rinsability
Applications & Uses
- Applicable Processes
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Home Care Applications
- Industrial Additives End Use
- Markets
- Applications
- Product Applications
- Fermentation
- Metal Working Fluids
- Pulp and Paper Processing
- Dishwashing Detergent
- Rinse Aid
- Industrial / Institutional Cleaning
Properties
- Physical Form
- Note
- ¹ HLB Values were measured using UPLC w/ Evaporative Light Scattering Detection against known standards.
- ² Surface Tension: 1% aq at 25°C.
- ³ ASTM D2281-10, Evaluation of Wetting Agents by the Skein Test, 0.5% aq at 25°C.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S001809
- Principal
Storage & Handling
- Storage Conditions
NIONIC™ 25R2 Surfactant will absorb water if the product container is not secured properly. This may affect reactivity, appearance, and performance. Therefore, it is advised that all receptacles containing this material be tightly fastened and stored in a dry place.
Other
- Appearance
- Clear liquid
- Color (SDS)
- Clear
- Item Number
- Odor (SDS)
- Low odor
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions HLB Value 4.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 365.0 d d - Physical Properties
Value Units Test Method / Conditions Cloud Point 31.0 °C °C 1% aqueous solution Density 8.6 lb/gal lb/gal At 25°C Foam Height 0.0 mm mm ASTM D1173 at 25°C, 0.1 wt% actives, initial / 5 minutes Foam Height 0.0 mm mm ASTM D1173 at 25°C, 0.1 wt% actives, t = 0 Foam Height 0.0 mm mm ASTM D1173 at 25°C, 0.1 wt% actives, t = 1 Foam Height 0.0 mm mm ASTM D1173 at 25°C, 0.1 wt% actives, t = 3 Foam Height 0.0 mm mm Ross Miles Method at 25°C, 0.1 wt% actives, initial / 5 minutes Foam Height 0.0 mm mm Ross Miles Method at 25°C, 0.1 wt% actives, t = 0 Foam Height 0.0 mm mm Ross Miles Method at 25°C, 0.1 wt% actives, t = 1 Foam Height 0.0 mm mm Ross Miles Method at 25°C, 0.1 wt% actives, t = 3 Surface Tension 36.0 dyn/cm dyn/cm Viscosity 600.0 cPs cPs At 25°C Wetting Time min. 90.0 s s Wetting Time min. 90.0 s s Draves Wetting Test - Material Composition
Value Units Test Method / Conditions Active Content 100.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Density (SDS) 8.6 lb/gal lb/gal at 25°C Flash Point (SDS) min. 200.0 °F °F Pensky-Martens Closed Cup (PMCC) Specific Gravity (SDS) 1.02 - water=1 Viscosity (SDS) 600.0 cPs cPs at 25°C pH (SDS) 7.0 -