Enhanced TDS
Identification & Functionality
- Blend
- No
- Chemical Family
- Chemical Name
- Country of Origin
- Product Code
- MITM13844
- Product Functions
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Product Features
- Key Features
- Cimbar Performance Minerals intermediate Polyfill series alumina trihydrate products are specially produced for thermoset plastic/CASE applications that require high loading levels.
- Compounders using intermediate Polyfill series products are able to achieve maximum loading levels with acceptable physical properties.
- The increased loading levels with use of intermediate Polyfill series products increases flame retardancy and smoke suppression with more H₂O molecules available.
Applications & Uses
Properties
- Physical Form
- Soluble In
Regulatory & Compliance
- Compliance (Industry Standards)
- Compliance (Regulatory)
- Manufacturing Facility Standards
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002777
- Principal
Other
- Appearance (SDS)
- White grains
- Explosive Nature (SDS)
- Not explosive
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Protect from Freezing
- No
- Temperature Control
- No
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Loss on Ignition 34.6 % by Water - Material Composition
Value Units Test Method / Conditions Aluminum Content 64.9 % Ferric Oxide Content 0.009 % Silica Content 0.01 % as silicon dioxide Soda Content max. 0.3 % Soluble Soda Content max. 0.05 % as sodium dioxide - Optical Properties
Value Units Test Method / Conditions Brightness 97.0 % Hunter "L" - Physical Properties
Value Units Test Method / Conditions Bulk Density 43.0 lb/ft³ Bulk Factor 0.0495 gal/lb Free Moisture Content 0.5 % Median Particle Size 10.0 µm Oil Absorption 28.0 mL/100g Sieve Fractionation (Retained) 0.0 % +100 mesh Sieve Fractionation (Retained) 0.5 % 325 mesh Sieve Fractionation (Retained) 0.0 % + 200 Mesh Specific Gravity 2.42 - - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 2980.0 °C At 101.3 Kpa Decomposition Temperature (SDS) 200.0 °C Density (SDS) 2.4 g/cm³ Melting Point (SDS) approx. 300.0 °C At 101.3 Kpa Melting Point (SDS) 3450.0 °F after loss of water of hydration at elevated temperatures Relative Density (SDS) 2.4 - pH (SDS) 8.4-10.2 - 5% water suspension - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1825.0 d