Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- EC Number
- 244-492-7
- Industrial Additives Functions
- Plastics & Elastomers Functions
- Product Code
- MITM13856
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Key Features
Polyfill’s even distribution and free flowing properties permits higher loading levels without the generation of higher viscosities.
Applications & Uses
- Compatible Polymers & Resins
- Industrial Additives End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Markets
- Applications
- Product Applications
- Adhesives
- Caulks & Sealants
- Carpet Backing/latex Compounding
- Cast Polymers/cast Epoxies
- Ceramics
- Cipp Rehabilitation
- Elastomers
- Flooring
- Paints & Coatings
- Rubber
- Thermoplastics
- Thermoset Plastics (Bmc/smc, Extrusion, Pultrusion, Rtm, Spray-upapplication
- Fiberglass Reinforced Plastic (Frp) Applications
- Vinyl Applications
- Wire and Cable
Properties
- Physical Form
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S002777
- Principal
Other
- Appearance (SDS)
- Solid powder
- Insoluble in (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Exposure may aggravate those with pre-existing eye, skin, or respiratory conditions.
- USA/DOT UN Number
- Not Applicable
- Optical Properties
Value Units Test Method / Conditions Brightness 98.0 % % Hunter "L" - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 0.0 d d - Physical Properties
Value Units Test Method / Conditions Bulk Density 0.35 lb/ft³ lb/ft³ Bulk Factor 0.0495 gal/lb gal/lb Median Particle Size 2.2 µm µm Sieve Fractionation (Retained) 0.0 % % +100 mesh Sieve Fractionation (Retained) 0.0 % % +325 mesh Sieve Fractionation (Retained) 0.0 % % + 200 Mesh Specific Gravity 2.42 - - Material Composition
Value Units Test Method / Conditions Aluminum Content 64.9 % % Ferric Oxide Content 0.009 % % Silica Content 0.01 % % as silicon dioxide Soda Content max. 0.3 % % Soluble Soda Content max. 0.05 % % as sodium dioxide - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Decomposition Temperature (SDS) 392.0 °F °F Initial Boiling Point (SDS) 2980.0 °C °C at 1013kPa Melting Point (SDS) approx. 300.0 °C °C at 1013 kPa Relative Density (SDS) 2.4 - at 20°C pH (SDS) 8.4-10.2 - 5% water suspension