Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Chemical Family
- Cleaning Ingredients Functions
- Fluids & Lubricants Functions
- Plastics & Elastomers Functions
- Product Code
- MITM12020
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Coating End Applications
- Compatible Substrates & Surfaces
- Fluids & Lubricants End Use
- Fluids & Lubricants Type
- Home Care Applications
- I&I Cleaning Applications
- Markets
- Applications
- Product Usage Level
In general, Preventol® MP 260 should be added with good agitation at the end of the manufacturing process.
All recommendations are in percentage on total product weight.
Application Suggested Addition (%)
Wood preservatives 1.0 – 2.7 % Exterior paints 0.3 – 0.6 % Interior paints 0.3 – 0.6 % Adhesives 0.05 – 0.5 % Plastics 1.0 – 4.0 % Metal working fluids 0.3 – 1.0 % (calculated on Metal working fluids-concentrate)
Textiles coatings 0.10 – 1.5 % Paper coatings 0.15 – 1.5 % Inks 0.15 – 1.5 % Detergents, cleaners 0.02 – 0.3 %
Properties
- Physical Form
- Spectrum of Activity
The use of Preventol® MP 260 is based on the broad fungicidal effect of its active ingredient which is particularly effective against blue-staining fungi and moulds such as Aureobasidium pullulans, Sclerophoma pityophila, Aspergillus niger, Ceratocystis pilifera, Gliocladium virens, Penicillium citrinum, Phialophora fastigiata, Trichoderma spec.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000008
- Principal
Storage & Handling
- Storage Conditions
- Preventol® MP 260 is sensitive to frost and should not be stored at temperatures below -10°C and above 40°C.
- Components of the product may crystallise at storage temperatures below -10°C.
- These dissolve again when heated and stirred.
Other
- Color (SDS)
- Yellow clear
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG EmS Fire
- F-A
- IMO/IMDG EmS Spill
- S-F
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG UN Number
- UN3082
- Item Number
- Odor (SDS)
- Slight
- Other Hazards
- None known
- Protect from Freezing
- No
- Temperature Control
- Yes
- USA/DOT Emergency Response Guide Number
- 171
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT UN Number
- UN3082
- Application Information
Value Units Test Method / Conditions Dosage (Use Level) 1.0-4.0 % % in plastics Dosage (Use Level) 0.05-0.5 % % Adhesives Dosage (Use Level) 0.02-0.3 % % Detergents, cleaners Dosage (Use Level) 0.3-0.6 % % Emulsifier component Dosage (Use Level) 0.15-1.5 % % inks Dosage (Use Level) 0.3-0.6 % % Interior paints Dosage (Use Level) 0.3-1.0 % % metal working solutions Dosage (Use Level) 0.15-1.5 % % Paper coatings Dosage (Use Level) 0.1-1.5 % % Textiles coatings Dosage (Use Level) 1.0-2.7 % % Wood preservatives - Physical Properties
Value Units Test Method / Conditions Boiling Point min. 160.0 °C °C At 1013 Mbar Density 1.15 g/cm³ g/cm³ At 20°C Flash Point 131.0 °C °C Storage Temperature 14.0-104.0 °F °F Viscosity 195.0 - At 20°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 419.0 °F °F At 1013 Hpa Decomposition Temperature (SDS) min. 320.0 °F °F Density (SDS) 1.15 g/cm³ g/cm³ at 20°C Flash Point (SDS) min. 212.0 °F °F ASTM D93 Flash Point (SDS) min. 212.0 °F °F Closed Cup Ignition Temperature (SDS) 635.0 °F °F Kinematic Viscosity (SDS) 180.152 - At 20°C Kinematic Viscosity (SDS) 39.611 - At 38°C Vapor Pressure (SDS) 4.0 - Vapor Pressure (SDS) 2.0 - At 20°C Viscosity (SDS) 195.0 - pH (SDS) 6.67 - at 20°C - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 -