Products

D.E.R.® 663U Solid Epoxy Resin is a low molecular weight solid reaction product of epichlorohydrin and bisphenol A. D.E.R.® 663U Solid Epoxy Resin is a low molecular weight, solid epoxy resin developed mainly for use in powder coatings. It can be incorporated in both pure epoxy and epoxy/polyester systems where the relationship between its melt viscosity and softening point properties ensures the production of homogeneous powders with good gloss, excellent flexibility and smoothness, and good storage stability. D.E.R.®. 663U Resin can also be used in epoxy ester applications, for example, in industrial or automotive coatings.

EBECRYL® 242N is a tin-free aliphatic urethane acrylate diluted in isobornyl acrylate (IBOA).

CYMEL® U-1054 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and ethanol. CYMEL® U-1054 resin is suitable for industrial heat cured primer formulations because of the excellent adhesion, water and corrosion resistance properties. In can coating formulations, CYMEL® U-1054 provides an excellent balance between adhesion and film flexibility, especially after several cure cycles.

TEGO® AddBond LTW-B improves adhesion and flexibility of solvent borne coatings on steel, galvanized steel, aluminum, and plastics.

EBECRYL® 745 is an acrylic polymer diluted 46% by weight with a 1/1 ratio of the reactive diluents 1,6-hexanediol diacrylate (HDDA)(1) and tripropylene glycol diacrylate (TPGDA) . EBECRYL 745 is used as the primary or modifying oligomer in ultraviolet light (UV) or electron beam (EB) curable formulations to increase adhesion on difficult substrates.

D.E.R.® 755 Liquid Epoxy Resin is a flexibilized epoxy resin based on reaction products of epichlorohydrin with bisphenol-A and polypropylene glycol.

EBECRYL® 4857 is a low viscosity, monomer free aliphatic urethane diacrylate which exhibits good flexibility in UV or EB cured films. The resin is designed to exhibit low yellowing and good exterior durability. Due to its low Tg the product is suitable for applications requiring haptic properties (e.g. “soft touch/feel”).

EBECRYL® IBOMA (isobornyl methacrylate) is a mono-functional monomer which polymerizes when exposed to sources of free radicals. EBECRYL® IBOMA forms homopolymers and copolymers. EBECRYL® IBOMA is compatible with a wide range of acrylated- and methacrylated resins.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.

TPGDA is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TPGDA is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks.

EBECRYL® 4827 is an aromatic urethane diacrylate. Films of EBECRYL® 4827 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, low color and good adhesion to various substrates.

TEGO® AddBond 2220 improves flexibility and adhesion of solvent borne coatings. This soft polyester shows very good compatibility in non-polar formulations.

EBECRYL® 3702 is a fatty acid modified bisphenol A epoxy diacrylate that exhibits outstanding flow and leveling and pigment wetting properties. Films of EBECRYL® 3702 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, improved water resistance and good chemical resistance.

ALBIDUR® 1223 shows the highest performance in flexibilizing SILIKOPON® EF and SILIKOPON® ED without influencing chemical resistance properties, gloss, or transparency of the cured film.