Products

Rilsamid® AESNO P40 TL is a natural polyamide. This grade is plasticized and designed for tube extrusion.

EBECRYL® 4666 is a weather-stable undiluted aliphatic urethane acrylate having very low viscosity

RHOPLEX® HG-706 is the new binder is designed for interior and exterior VOC compliant gloss and semigloss enamels, allowing formulators to produce high-performance coatings at 50 g/l VOC. RHOPLEX® HG-706 takes advantage of innovative technology to improve enamel performance over that of conventional latex polymers. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX® HG-706 provide excellent adhesion, block, and stain removal.

RHOPLEX® SG-30 is a revolutionary emulsion designed to meet the needs of new regulations for 150 g/L VOC semigloss interior and exterior architectural paints. RHOPLEX® SG-30 provides paint manufacturers an opportunity to formulate at lower VOC while maintaining key properties of conventional (250 g/L VOC) semigloss architectural paints.The results of laboratory tests comparing the performance properties of RHOPLEX® SG-30 formulated to 150 g/L VOC to a conventional 250 g/L VOC semigloss emulsion are included in this bulletin.

AEROSIL® R 972 V is a densified hydrophobicfumed silica, aftertreated with DDS(Dimethyldichlorosilane). Duetothedensification it shows a weaker rheologicaleffect than AEROSIL® R 972.

DLVE™ 52 is a low viscosity epoxy resin that facilitates high solids coating formulations with low volatile organic compound (VOC) emissions, while minimizing compromises in performance. DLVE™ 52 be cured using multiple types of curing agents.

EBECRYL® 270 is an aliphatic urethane diacrylate. Films of EBECRYL 270 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, adhesion, abrasion resistance, exterior durability, and are resistant to yellowing.

SURFYNOL® 104 PG 50 is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

CARPOL® NIONIC™ L-101 Surfactant is a nonionic surfactant with a chemical structure designed to make it act as a defoamer in many applications. Even at very low concentrations, CARPOL® NIONIC™ L-101 can be used to reduce the superficial tension of liquids, including high viscosity liquids. Defoaming performance is a function of cloud point and end use temperature and CARPOL® NIONIC™ L-101 is a good general/low temperature defoamer. They are water soluble at low temperatures and will flocculate when warmed above their cloud point