Products

D.E.R.® 662E is a low molecular weight "2-type" epoxy resin.

TEGO® Foamex 805 N is a very compatible defoamer emulsion based on polyether siloxane technology. Highly suitable for post-addition.

EBECRYL® LED 03 is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. EBECRYL® LED 03 when combined with an appropriate photoinitiator system transforms formulations into UV LED, UVA, or low energy curable systems by providing improved surface cure. In addition, this effect is also seen in high energy cure formulations. The improved surface cure is obtained by mitigating oxygen inhibition of the free radical process and/or by being an amine synergist for Norrish type II photo initiators. Coating and inks based on EBECRYL® LED03 exhibit a low odor after UV or EB curing.

EBECRYL® LEO 10102 is used in printing inks and functions as a binder and resin in CASE ingredients.

RHOPLEX® ASE-75 is an acrylic thickener used to increase viscosity.

Bayferrox® 120 NM is a single-ingredient inorganic pigment, known as Pigment Red 101, derived from Iron Oxide. It is widely used for its stable and vibrant color properties in various industrial applications.

RHOPLEX® 2500 is designed for tough, water-resistant masonry paints and primers. Coatings based on RHOPLEX® 2500 possess very good adhesion to masonry substrates, excellent durability (gloss and tint retention, and dirt pickup resistance), and the ability to retard efflorescence in cured cementitious products.

RHOPLEX® WL-100 is an acrylic-styrene copolymer designed for high-gloss, high-DOI (Distinctness of Image) waterborne plastic coatings where an attractive appearance and excellent dry and wet adhesion are important considerations. The favorable colloidal stability (robustness) of RHOPLEX® WL-100 accommodates a broad range of formulation types and formulation process techniques, providing the formulator with a versatile binder for a variety of applications. Robustness, along with 50% weight solids, allows the formulator to achieve volume solids above conventional waterborne binders.

RHOPLEX® EC-2848 is designed to provide elastomeric coatings with an excellent balance of elongation, tensile strength and dirt pickup resistance over a wide temperature range. The elongation properties of the polymer allow coatings to bridge dimensionally unstable cracks without rupturing. It also provides an excellent balance of toughness and elasticity at both low and high temperatures without sacrificing dirt pickup resistance. Coatings based on RHOPLEX® EC-2848 retain an attractive appearance as they age.

ACRYSOL™ RM-6000 Rheology Modifier is a nonionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM-6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

EBECRYL® LEO 10601 is a modified epoxy acrylate that provides low extractables and low odor after UV or EB curing. EBECRYL® LEO 10601 exhibits good pigment wetting properties and produces UV offset inks exhibiting enhanced ink water balance and low misting. EBECRYL® LEO 10601 can also be used to produce UV flexo inks with good flow, high gloss and high reactivity.

CRAYVALLAC® PA4 X 20 is a rheology modifier pre-activated amide wax supplied in a mixture of xylene and alcohol. It is a rheology modifier in paste form with enhanced transparency, excellent anti-sagging and anti-settling properties.CRAYVALLAC® PA4 X 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application.

EBECRYL® LEO 10551 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing.EBECRYL LEO 10551 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

RHOPLEX® WL-81, waterborne, acrylic polymer is specifically designed for the formulation of clear and pigmented ambient or forced-air-dry industrial lacquers. Coating systems based on this polymer are suitable for use on a variety of substrates and offer a number of key benefits currently provided by solvent borne industrial lacquers, but without the flammability, odor, or other problems inherent with such systems.

ACRYSOL™ DR-1 Thickener is a synthetic, liquid thickener that offers a low cost/high performance alternative to cellulosic thickeners in interior flat latex paints. ACRYSOL™ DR-1 Thickener provides application and feel properties very similar to medium grades of cellulosic and hydrophobically modified HEC thickeners with excellent resistance to roller spattering and improved leveling in most formulations. ACRYSOL™ DR-1 Thickener is easy to handle and incorporate during the paint manufacturing process and is highly resistant to microbial attack. ACRYSOL™ DR-1 Thickener is part of the Designed Rheology product line which provides customized rheology based on key components.