Products

RHOPLEX® MV-23LO is an aqueous, all-acrylic binder designed for interior and exterior wood primers and stain-blocking sealers. It is a versatile vehicle that can be used in both the formulation of primers that upgrade difficult substrates into sound repaint surfaces, and stain blocking sealers that minimize the "bleed through" of wood tannins and common household stains.

EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing.

ORGASOL® 2002 D NAT 1 is a spheroïdal powder of polyamide 12, with 20 um as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance.

EBECRYL® 294/25 is an aliphatic urethane triacrylate diluted 25% by weight with the reactive diluent 1,6-hexanediol-diacrylate (HDDA). Films of EBECRYL® 294/25 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion and stain resistance, good exterior durability, toughness, and are resistant to yellowing.

RHOPLEX® HG-706 is the new binder is designed for interior and exterior VOC compliant gloss and semigloss enamels, allowing formulators to produce high-performance coatings at 50 g/l VOC. RHOPLEX® HG-706 takes advantage of innovative technology to improve enamel performance over that of conventional latex polymers. The combination of an all-acrylic backbone and ambient-cure crosslinking technology provides superior performance in formulations ranging from 50 to 150 g/l VOC. Enamels based on RHOPLEX® HG-706 provide excellent adhesion, block, and stain removal.

EVOQUE™ 3150 100% Acrylic Emulsion was developed for increased titanium dioxide efficiency for improved hiding or equal hiding at lower TiO₂ loadings. EVOQUE™ 3150 100% Acrylic Emulsion also employs ambient crosslinking technology which improves household stain resistance performance and chemical resistance properties. Overall exterior durability is expected to be excellent based on previous commercial versions of EVOQUE™ technology.

SPHERILEX® DP-0117 is a precipitated amorphous (crystalline-free) silica with uniquely spherical particle shape and very narrow particle size distribution.

EBECRYL® 1365 is a hexa-functional silicone modified urethane acrylate diluted in 50% of EBECRYL® 160. EBECRYL® 1365 can be used to prepare UV/EB curable coatings with low surface energy providing anti-stain and easy-to-clean properties. Additionally EBECRYL® 1365 can be used as a processing agent in matt and excimer curable formulations, facilitating a uniform film creation which in turn significantly increases the process robustness.

ROSHIELD™ 3188 is a self-crosslinking acrylic copolymer designed for use in factory-applied, waterborne, interior wood coatings. It offers good early sandability, block resistance, and stain resistance, as well as extremely low microfoam entrapment. ROSHIELD™ 3188 is recommended for sanding sealers and clear topcoats, and offers excellent clarity and appearance over both dark and light woods. Its self-crosslinking chemistry is responsible for its rapid cure and excellent stain resistance.

EBECRYL® 1200 is an acrylate functional acrylic resin supplied in 45% by weight of butyl acetate. Upon evaporation of the solvent, films of EBECRYL® 1200 are physically dry and tack-free and after UV/EB curing are hard and chemical resistant without embrittlement. The viscosity and cured properties can be adjusted with the addition of reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), trimethylolpropane triacrylate (TMPTA), and tripropylene glycol diacrylate (TPGDA). A suitable photoinitiator must be added for polymerization with UV energy

TAMOL® 2011 is a high-performance, hydrophobic copolymer dispersant especially useful for semi-gloss and gloss paints. TAMOL® 2011 is well suited for today’s generation of formulations as it is made without solvents or APEO surfactants. TAMOL® 2011 is particularly well fitted for formulations that contain hydrophobically modified urethane rheology modifiers.

ORGASOL® 2002 ES4 NAT 3 is a spheroldal powder of polyamide 12, with 4 as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing xcellent coneletency in parformancs.

RHOPLEX® DCR-317 is an aqueous all-acrylic emulsion polymer designed for formulating into high solids Deck and; Concrete Restoration coatings. Restoration coatings can be formulated with RHOPLEX® DCR-317 Binder to help provide excellent flexibility and dirt pick- up resistance, in addition to adhesion to concrete and well-weathered wood.

ORGASOL® 2001 UD NAT 2 is an ultrafine powder of polyamide 12, with a narrow article size distribution and nearly round particle shape.