Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Country of Origin
- Function
- Binder, Resin
- Plastics & Elastomers Functions
- Product Code
- MITM11252
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Benefits
- Low ammonia
- Low odor
- Formaldehyde-free
- Low VOC
- Excellent stain-blocking
- Good adhesion to weathered unpainted wood and typical repaint substrates
- Excellent holdout of topcoats
- Nail head rust resistance
- Corrosion resistance
- Good zinc oxide stability
- Good flow and film build
Applications & Uses
- Application Area
- Coating End Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Markets
- Applications
Properties
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000005
- Principal
Storage & Handling
- Storage Conditions
Store products in tightly closed original containers at temperatures recommended on the product label.
- Handling Information
- Keep combustible and/or flammable products and their vapors away from heat, sparks, flames and other sources of ignition including static discharge.
- Processing or operating at temperatures near or above product flashpoint may pose a fire hazard.
- Use appropriate grounding and bonding techniques to manage static discharge hazards.
- Failure to maintain proper volume level when using immersion heaters can expose tank and solution to excessive heat resulting in a possible combustion hazard, particularly when plastic tanks are used.
Other
- Appearance
- Milky white liquid
- Color (SDS)
- White milky
- Item Number
- Odor (SDS)
- Ammonia
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 8.5 - - Material Composition
Value Units Test Method / Conditions Solid Content 43.0 % % - Physical Properties
Value Units Test Method / Conditions Bulking Value 0.105 gal/lb gal/lb dry solids Bulking Value 0.114 gal/lb gal/lb wet Density 8.8 g/cm³ g/cm³ Film Forming Temperature 8.0 °C °C Specific Gravity 1.054 - Storage Temperature 33.8-120.2 °F °F Viscosity 200.0-1800.0 cPs cPs Brookfield Viscometer At 25°C, Spindle 3, 60 Rpm - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Evaporation Rate (SDS) max. 1.0 % % Butyl Acetate=1 Melting Point (SDS) 0.0 °C °C Relative Vapor Density (SDS) max. 1.0 - Air=1 Specific Gravity (SDS) 1.013-1.09 - Vapor Pressure (SDS) 17.0 mm Hg mm Hg at 20°C Viscosity (SDS) 50.0-700.0 mPa.s mPa.s Volatile Content (SDS) 56.0-58.0 % % Water pH (SDS) 8.1-9.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 540.0 d d