Products

Bermocoll® EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

AP 5980L is a low viscosity modified cyclo-aliphatic amine adducts hardener for epoxy resin based coatings. It exhibits high chemical resistance.

AP 5972 is a modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperatures.

TRIGLYCIDYL ISOCYANURATE JF-77 is an isocyanurate based crystalline polyepoxide compound, its molecular weight is 297(CAS Number:2451-62-9), it owns good heat resistance, weather resistance, adhesive and high temperature performance.

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. EBECRYL® 3701 imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates.

ZHENGDA® ZM-1207 is a monoamine based on a copolymer backbone. ZHENGDA® ZM-1207 polyetheramine is a monofunctional, primary amine with an average molecular weight of about 2,000. The propylene oxide/ethylene oxide (PO/EO) mol ratio is 10/31.

APODIL 1018 is a low viscosity, aliphatic diepoxide reactive diluent based on Neopentyl glycol. It is compatible with all types of epoxy resins in any proportion.

EBECRYL® 8413 is designed as the pigment grind oligomer for UV cured thermoformable ink applications and is designed for use in conjunction with the letdown oligomer, EBECRYL® 1300. EBECRYL® 8413 exhibits good milling properties and has very high elongation (550%). When used together with EBECRYL® 1300, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

PIGMENT YELLOW E4GN /OF is an organic pigment of the azo-nickel-complex chemical family, used as a pigment in case ingredient applications.

EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultraviolet) or EB (electron beam) curable coatings and inks. EBECRYL® 130 can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. EBECRYL® 130 can also significantly increase the Tg of cured polymers. EBECRYL® 130 is particularly useful for scratch resistant coatings an plastics and as a pigment grinding vehicle for UV inkjet inks.

EBECRYL® 8800 is an aliphatic urethane acrylate diluted with 10% by weight of the reactive diluent ethoxyethoxyethyl acrylate (EOEOEA). Films of EBECRYL® 8800 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness, rapid cure response and resistance to yellowing.

AP 1018 is a low viscosity reactive, solvent free phenalkamine hardener for epoxy resins based lacquers and coatings.

Bermocoll® EHM EXTRA is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Castorwax® is a wax like compound obtained by the controlled hydrogenation of pure castor oil. The principle constituent is glycerol tri-(12-hydroxystearate), also known as opalwax. Castorwax® is a hard, brittle, high melting point wax that is insoluble in most organic solvents but is highly compatible with most resins and waxes.

AP 1520 is a low viscosity, solvent free, Polyaspartic acid.