EBECRYL® 130

EBECRYL® 130 is characterized by:

• Low odor 
• Light color 
• Low viscosity

UV/EB cured products based on EBECRYL® 130 are characterized by the following performance properties:

• High Tg 
• Low shrinkage 
• Improved adhesion
• Reduced water permeability

EBECRYL® 130 can be used to disperse all process color pigments via bead mill for the production of inkjet inks.

Formulated UV/EB curable products containing EBECRYL® 130 may be applied via lithographic, screen, gravure, inkjet, direct or reverse roll, and curtain coating methods. EBECRYL® 130 is recommended for use in:

• Scratch and abrasion resistant coatings 
• Coatings requiring increased thermal resistance 
• Inkjet inks

• (1) Theoretical determination based on the undiluted oligomer.
• (2) UV cured 5.0 mil thick film.

• Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
• might cause uncontrollable polymerization of the product with the generation of heat.
• Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
• Procedures that remove or displace oxygen from the material should be avoided.
• Do not store this material under an oxygen free atmosphere.
• Dry air is recommended to displace material removed from the container.
• Wash thoroughly after handling.
• Keep container tightly closed.
• Use with adequate ventilation.