Products

EBECRYL® 740/40TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates.

AP 4406 is modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperature.

AP 1442 is a medium viscosity reactive, phenalkamine hardener for epoxy resins based lacquers and coatings.

Bermocoll® FLOW is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water based paints.

Zochem Grade 102T is a brilliant white powder manufactured by the French (Indirect) Process. Grade 102 offers high assay, very low impurities, and fine particle size with the highest French Process m2/g surface area (“SA”) available. Grade 102 replaces grades KADOX 911. Zochem Grade 102T is also available with processing aid/surface treatment.

ACRYSOL™ RM-12WE Rheology Modifier is a nonionic rheology modifier designed to offer high low-shear viscosity with an extremely shear thinning rheology and excellent thickening efficiency. It offers a rheology profile similar to ACRYSOL™ RM-12WE Rheology Modifier but is prepared without intentionally adding tin compounds to the production process.

Bermocoll® EBS 481 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

ZHENGDA® ZD-123 is characterized by repeating oxypropylene units in the backbone. ZHENGDA® ZD-123 Amine-terminated Polyether is a difunctional, primary amine with an average molecular weight of about 230. The primary amine groups are located on secondary carbon atoms at the end of the aliphatic polyether chain.

DPGDA is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.

AP 5635 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

Caspol™ 5001 is a 100% solids castor oil based reactive diluent with a linear chain backbone having low viscosity, good compatibility and wetting. This polyol is the lowest molecular weight diol of the Caspol series. Caspol™ 5001 has a very low viscosity and produces higher strength, elongation and flexibility than DBTM Oil.

PURMOL™ 3ST is a potassium (K) type A zeolite with a pore size of approximately 3 Angstroms (0.32 nm). Purmol 3ST is recommended for use with high quality coatings. In general, we recommend the addition of 2.5% - 5% Purmol powder to the polyol component. This must be stirred thoroughly for a minimum of two hours to allow the Purmol to adsorb all the water before addition of the isocyanate.

RHOPLEX® P-308 is an excellent choice when formulating paper coatings for high quality printing and packaging that require excellent gluing properties. Paper and paperboard coatings formulated with RHOPLEX P-308 can reduce print mottle in the Lithographic printing process. It was designed to have excellent compatibility with calcium ions for today’s high calcium carbonate pigment systems and the styrene-acrylic chemistry makes this a hydrophobic binder.

Polycin® T-400 is a solventless, castor oil-based derivative designed for use as a polyol or viscosity modifier in polyurethane coating systems. Polycin® T-400 will impart higher hardness and strength, and as a reactive diluent, Polycin® T-400 provides VOC reduction along with the beneficial properties of castor oil derivatives, such as improved hydrophobicity, flow and levelling.

EBECRYL® 3708 is a modified bisphenol A epoxy diacrylate that exhibits relatively low viscosity and good cure response. Films of EBECRYL® 3708 cured by ultra- violet light (UV) or electron beam (EB) demonstrate good flexibility, high gloss, toughness, and superior impact resistance.