Products

RHOPLEX® E-2961 is a polyacrylate based polymer that contains carboxylic acid groups. This rheology modifier is a pre neutralized alkali-swellable emulsion which requires no pH adjustment. This RM offers a good combination of thickening efficiency and water holding. It is excellent for heavy paper and paperboard applications where heavy coat weights are common.

DzBh Baling® SEBS YH-604T is a radial hydrogenated styrene/butadiene block copolymer.

ACRYSOL™ DR-110 Rheology Modifier is effective at building viscosity in a wide range of water-borne coatings formulations, from flat to semigloss. It offers application and feel properties to coatings that is very similar to those of hydroxyethylcellulose thickeners, particularly the hydrophobically modified type. Thus, it can provide a very cost-effective alternative to these cellulosic thickeners.

UCECOAT® 6560 is an aliphatic urethane acrylate solution in water, containing approx. 50% acrylated products. The UCECOAT® 6560 is organo-tin free and highly recommended as primer for wood applications. Films containing UCECOAT® 6560 and cured by ultraviolet light (UV) or electron beam (EB) exhibit a nice optical aspect on different woods. Stability problems can occur if more water is added. Therefore, we recommend to use the EBECRYL® 11 produced by allnex.

Bermocoll® Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance. and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

EBECRYL® 4513 is an aliphatic urethane acrylate supplied for use in formulations of ultraviolet (UV) and electron beam (EB) energy curable coatings. EBECRYL® 4513 exhibits elastic properties making it suitable for use flexible substrates. Coatings formulated with EBECRYL® 4513 also demonstrate high chemical and wear resistance and are highly resistant to yellowing.

CRAYVALLAC® 60X is used in epoxies (EP) and vinyls. It is applied in anti-fouling coatings, chlorinated rubber coatings, primers, and solventborne coatings. The product provides anticaking, recoatability, and sag resistance.

WANNATE® HB-200 is an aliphatic biuret polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid.

EBECRYL® 284 is an aliphatic urethane diacrylate diluted 12% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA)(1). Films of EBECRYL® 284 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, toughness, and flexibility, and are resistant to yellowing.

DzBh Baling® YH-1126 is a linear styrene/isoprene block copolymer.

EBECRYL® 8894 is an aliphatic urethane acrylate, diluted in butyl acetate, designed for applications requiring high humidity and abrasion resistance. Films of EBECRYL® 8894 cured via exposure to ultraviolet light (UV) or electron beam (EB) exhibit excellent exterior durability, good toughness and flexibility, as well as the non-yellowing properties typical of an aliphatic urethane.

WANNATE® IT-100 is a cycloaliphatic polyisocyanate based on isophorone diisocyanate. WANNATE® IT-100 is a solvent-free material, supplied as pellets. This cycloaliphatic polyisocyanate is light-stable and non-yellowing. It has especially been developed as an isocyanate crosslinking agent for 2K PUR coatings or adhesives. It is also supplied as 70 pbw. solutions in various solvents.

AP 5660 is a low viscosity, modified aliphatic amine hardener for epoxy resins based coatings at ambient and elevated temperature curing.

Exolit® AP 435 is a fine particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

WANNATE® HTBL-175S is a MEKO blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% Solvent naphtha 100, colorless to slightly yellowish clear liquid.