Products

TEGO® Foamex 26 is defoamer concentrate based on polyether siloxane technology. Offers a good balance of effectiveness and compatibility. Especially for architectural paints.

DzBh Baling® SEBS YH-602T is a radial hydrogenated styrene/butadiene block copolymer with excellent tensile strength and MFR.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

D.E.R.® 322 liquid epoxy resin is a reaction product of epichlorohydrin and bisphenol a modified with an aromatic mono-functional reactive diluent.

ACRYSOL™ DR-300 associative thickener delivers effective shear-thinning rheology in coatings ranging from matt to semi-gloss, with a primary focus on exterior applications. The distinctive viscosity profile of this synthetic liquid thickener ensures sag resistance for higher film builds, all while maintaining the improved flow typical of associative thickeners. ACRYSOL™ DR-300 also provides good early water resistance to acrylic, styrene-acrylic, and vinyl-acrylic coatings, even on chalky or aged surfaces. As with all Designed Rheology products, ACRYSOL™ DR-300 is easily incorporated during the paint manufacturing process. A key benefit of ACRYSOL™ DR-300 is that it offers superior performance at a lower formulation cost compared to traditional cellulosic thickeners, owing to its enhanced thickening efficiency.

AEROSIL® R 805 Silicas is a fumed silica after-treated with organosilane. It provides utmost transparency.

CRAYVALLAC® SLX is a high performance micronised amide wax rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane systems, where processing temperatures typically lie within the range 60 - 90°C. CRAYVALLAC® SLX particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

DzBh Baling® SIS YH-1124 is a linear styrene/isoprene block copolymer.

Coscat® 83 is an organobismuth compound that was specifically developed as a catalyst for two component, polyurethane systems. For soft to medium hardness systems the addition of a zinc catalyst can reduce a potential lag in final cure, yielding a stronger final cure typical of a mercury-based catalyst.

Licocene® PE 4201 granules is a metallocene catalyst based polyethylene wax.

NuTone® 37 is a low structure carbon black that can impart high gloss and high jetness in printing inks, coatings and other applications.

Sterotex® P is a spray-chilled powder produced from fractionated, non-hydrogenated, refined palm oil.

AEROSIL® R 976 is a single-ingredient organosilicon compound, specifically silica dimethyl silylate. It is compatible with silicone elastomers and is odor-free. This product is primarily used in varnishes and toners, where it improves the flow properties and enhances the overall performance of these formulations.

CARPOL® PGP-4025 is a propylene glycol-initiated polyether polyol. The resulting material has a functionality of two and an average molecular weight of 4000 Da. This diol is polymerized with propylene oxide and then capped with 25% ethylene oxide. The outcome is a polyol with enhanced reactivity when compared to its counterpart CARPOL® PGP-4000. Main applications include C.A.S.E., however, CARPOL® PGP-4025 may also be included as a component in other urethane products and formulations.

ACEMATT® HK 440 is an untreated, extremely coarse particle sized precipitated silica. It is especially recommended for base coats, thick-film applications, and general industrial coatings.