Products

HP0145 - Water-Reducible Alkyd is a water-reducible short oil chain stopped alkyd dissolved in Glycol Ether EB and 2-Butanol (50/50). Based on Tall Oil Fatty Acids, this product may be reduced with water after appropriate neutralization with materials such as ammonia, triethylamine or DMEA. Baking enamel formulations can also be produced by adding appropriate amino resins.

AP4406L is a modified aliphatic amine hardener used with liquid epoxy resin based systems at ambient as well as low temperature.

EBECRYL® 4220 is an aliphatic urethane acrylate diluted 25% in tripropyleneglycol diacrylate (TPGDA). EBECRYL® 4220 produces tough coatings that resist yellowing.

AP1028 is medium viscosity, reactive, phenalkamine hardener for epoxy resin based lacquers and coatings.

POLYCO™ 2160 is Carboxylated Polyvinyl Acetate Homopolymer with excellent mechanical stability and very low grit levels. Medium particle size with good pigment binding ability and excellent water resistance. Minimizes "water interference mottle" in offset printing and offers good ink receptivity, glueability, and brightness with very low odor.

EBECRYL® LEO 10553 is a low viscosity polymeric amine modified polyether acrylate that provides low extractables, low odor and low migration and after UV or EB curing. EBECRYL® LEO 10553 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.

EBECRYL® 8110 is a novel(1) energy curable specialty resin developed to enhance coatings with long lasting easy-to-clean (E2C) surface property. Coatings based on EBECRYL 8110 cured by ultraviolet light (UV) or electron beam (EB) exhibit oil and water repellent effect (high contact angle) and easy removal of fingerprints, oils, dust and other contaminants from coatings surfaces.

EVOQUE™ 3150C was engineered to enhance titanium dioxide efficiency, providing improved hiding or equivalent hiding at a reduced titanium dioxide usage level. This acrylic emulsion incorporates ambient crosslinking technology, which improves household stain resistance performance and chemical resistance properties. Based on prior commercial iterations of EVOQUE™ technology, the overall exterior durability is anticipated to be excellent.

Staybelite® Resin is gum rosin that has been partially hydrogenated via a catalytic process. It is a pale, thermoplastic, acidic resin, Hydrogenation makes this resin highly resistant to oxidation and discoloration and to changes in solubility characteristics, when it is exposed to air and heat. In these respects, it is greatly superior to ordinary non- hydrogenated rosins.

CYMEL® U-663 resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties combined with very good block resistance makes CYMEL® U-663 resin suitable for acid curing wood coating applications where low formaldehyde emission and high film gloss is required.

ZINC OXIDE GRADE 500 is a brilliant white powder manufactured by the French (Indirect) Process. Grade 500 is a popular general use high quality lower lead (Pb) zinc oxide. Grade 500 meets GMP 21CFR110, is USFDA approved as GRAS (Generally Recognized As Safe) at 21cfr182.8991 and is authorized by the USFDA for use wherever GRAS is approved including food contact in rubber, plastics, and coatings. ZINC OXIDE GRADE 500 is also meets the requirements of ASTM specification D79, 2000/53/EC End of Life Vehicles (ELV Directive), 2002/95/EC Restriction of Hazardous Substances Directive (RoHS) for heavy metals and Waste Electrical and Electronic Directive (WEEE), and other regulations where high quality zinc oxide is required. The product is also available in pelleted form (grade 500P), and with around up to 0.1% processing aid/surface treatment (grade 500T) for some rubber mixers.

EBECRYL®741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. It is designed for general purpose application on many treated plastic substrates. It can also be used as a let-down resin in combination with EBECRYL® epoxy acrylates, polyester acrylates and urethane acrylates.

Thetawet™ FS-8000 is a nonionic surfactant used in cleaning applications. It features good acid stability and reduces surface tension.

EBECRYL® 889 is an energy curable polyester acrylate for publication inks. EBECRYL® 889 provides good pigment wetting and color development for process color inks. Inks made with EBECRYL® 889 exhibit good adhesion to super- calendared paper, good ink transfer and excellent printability.