Products

3M™ Boron Nitride Cooling Filler Platelets 007HS is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.

Bermocoll® EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water based products.

CARPOL® GP-6015 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 6000 Da. This triol is polymerized with propylene oxide and then capped with 15% ethylene oxide. The outcome is a polyol with enhanced reactivity. Main applications include C.A.S.E., as this polyol has low total unsaturation levels and an antioxidant package tailored for this type of market.

ACRYSOL™ RM-6000 Rheology Modifier is a nonionic urethane rheology modifier based on solvent-free1 technology offering improved efficiency without sacrificing key performance properties. The efficiency in both the medium shear and high shear range results in good flow and leveling with high film build while maintaining good sag resistance. ACRYSOL™ RM-6000 Rheology Modifier has demonstrated utility in a broad range of emulsions, including the “newer generation”, low-VOC types such as RHOPLEX™ SG-30 Acrylic Emulsion and RHOPLEX™ ML-300 Acrylic Emulsion.

TEGO® AIREX 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent borne, radiation-curing and high solids coatings and inks. Very suitable for high build and high viscosity applications.

VPS SIVO 260 is a novel multifunctional siloxane adhesion promoter with aminofunctionalities that can be used for various applications. VPS SIVO 260 is mainly dedicated for use in adhesives and sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers®) and RTV-silicones - especially to difficult to stick polycarbonate substrates. In addition, VPS SIVO 260 can lead to adequate adhesive cure and it imparts both additional flexibility and hydrophobicity.

TEGO® Foamex 8820 is an effective bio-based defoamer concentrate based on organic polymer technology. It has broad food contact compliances with green and renewable contents. Freeof silicone, solvent, and mineraloil.

AP 5942 is cycloaliphatic, modified with epoxy resin stabilized polyamine adduct.

Vorite® 125 has been polymerized by a unique process, which imparts excellent thermal and viscosity stability. The Vorite® oils are polymeric plasticizers for cellulosics and elastomers in adhesives, sealants, gasket cements and belt dressings. They aid in plasticizing the reactants (polyol) for flexible urethane foams and elastomers. Other uses include lacquers, marking inks and plug valve lubricants.

Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations.

SURFYNOL® 104 is a multi-functional surfactant that combines dynamic wetting and molecular defoaming in waterborne coatings and inks. SURFYNOL® 104 is available in liquid form in different solvent cuts.

SUKOREZ® SU-110 is a waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

AP 5904 is a low viscosity, modified Cycloaliphatic amine adduct hardener for epoxy resin based lacquers and coatings.

SURFYNOL® 104 H is a multifunctional surfactant providing combined dynamic wetting and molecular defoaming in waterborne coatings and inks.

3M™ Boron Nitride Cooling Filler Platelets 003 is a versatile ceramic material offering thermal conductivity, temperature stability, chemical resistance, high reflectivity, lightweighting and electrical insulation. The structure of layered hexagonal plates provides outstanding lubricating properties and is non-abrasive to tooling.