Products

CYMEL® 325 is a new type of highly methylated melamine-formaldehyde resin which does not require strong acid catalyst for fast cure response. CYMEL® 325 is reactive with hydroxyl amide and carboxyl group containing polymers. The weight loss of CYMEL® 325 during the baking process is significantly less than that of partially methylated melamine-formaldehyde resins. The baking volatiles from CYMEL® 325 contain very low levels of formaldehyde. The lower weight loss of CYMEL® 325 crosslinked coatings also results in less tendency to blister at higher film thickness. CYMEL® 325 requires only weak acid catalysis for cure; a low acid number in the backbone resin is suffi- cient. The cure reaction additionally can be catalyzed with weak organic acids or inorganic acids such as maleic, citric, phosphoric or alkyl phosphoric acids, low levels of p-toluene sulfonic acid or CYCAT® 14040 catalyst. CYMEL® 325 will self-condense like a partially methylated resin. Higher film hardness may, therefore, be obtained by raising the level of amino crosslinking agent. The high reaction rate of CYMEL® 325 at lower temperature reduces the chance of evaporation of low molecular weight resin components. CYMEL® 325 should, therefore, be very suitable for applications where "smoking" of the baking exhaust is a problem. Compared to partially methylated melamine-formalde- hyde resins, CYMEL® 325has shown, in some water-reducible coatings, improved humidity and salt- spray resistance. CYMEL 325 resin is FDA approved under section 121.2514 and 121.2526.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

RHOPLEX® PR-409AF is an aqueous, all-acrylic binder designed for premium performance in universal stain blocking primers and primer-less paints. It’s distinct molecular weight distribution, combined with ambient crosslinking enables excellent adhesion to a variety of substrates without the use of APEO surfactants1. Coatings based on RHOPLEX® PR-409AF provide robust adhesion to metals, wood, masonry, cementitious, ceramic, alkyd and especially aged chalky substrates. The great compatibility of RHOPLEX® PR-409AF with zinc oxide can further enhance the exceptional stain blocking (household and tannin) and efflorescence of primers made with it. This binder further affords step out performance with the unusual combination of superior crack resistance combined with excellent dirt pick up resistance.

EBECRYL® 244 is an aliphatic urethane diacrylate diluted 10% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA) (1). EBECRYL® 244 exhibits light color and good cure response. Films of EBECRYL® 244 cured by ultraviolet light (UV) or an electron beam (EB) demonstrate good flexibility, toughness, abrasion and water resistance, and are resistant to yellowing.

EBECRYL® 294/25 is an aliphatic urethane triacrylate diluted 25% by weight with the reactive diluent 1,6-hexanediol-diacrylate (HDDA). Films of EBECRYL® 294/25 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion and stain resistance, good exterior durability, toughness, and are resistant to yellowing.

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. When used together with EBECRYL® 8413, non-blocking thermoformable inks can be developed. These thermoformable inks demonstrate scratch and temperature resistance, as well as excellent adhesion to a variety of plastic substrates without the necessity of corona discharge or flame pretreatment.

EBECRYL® 1871 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL® 1871 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL® 1871 has been specifically developed to formulate low migration UV/EB curable inks for indirect food contact applications.

PACE® 381 is a vinyl acetate homopolymer made in a polyvinyl alcohol colloidal system

CARPOL® GP-4520-55 is a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 4500 Da. This triol is polymerized with propylene oxide and then capped with 20% ethylene oxide. Main applications include C.A.S.E., however, CARPOL® GP-4520-55 may also be included as a component in other urethane products and formulations.

Dynasylan® VPS 4721 is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows VPS 4721 to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® VPS 4721 is a colorless liquid. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

CARPOL® PGP-1000 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-1000 has a functionality of two and an average molecular weight of 1000 Da. This diol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® PGP-1000 may also be included as a component in other urethane products and formulations.

EBECRYL® 8701 is an aliphatic urethane triacrylate designed to bridge the gap between high surface hardness and excellent outdoor durability. EBECRYL® 8701 can be used in applications requiring a combination of hardness, increased Tg, chemical resistance, and outdoor durability. Films ofEBECRYL® 8701 cured by ultraviolet light (UV) or electron beam (EB) exhibit a unique combination of surface hardness and outdoor durability typically not found in one molecule. Over time, EBECRYL® 8701 may crystallize to a waxy solid form.

CYMEL® U-21-511 Resin is a partially n-butylated urea resin supplied in n-butanol and is the HAPs compliant version of CYMEL® U-21-510. It has excellent compatibility with epoxy resins. It is recommended in primer formulations which are to be topcoated and re-baked. Low viscosity and epoxy solution compatibility make this product an ideal modifier.

CYMEL® 3745N Resin is a highly methylated melamine crosslinker designed for use in both solvent-borne and waterborne industrial finishes. Its high functionality and low tendency to self-condense promotes excellent formulated stability and results in films with very good hardness development, flexibility, formability, and resistance properties making it suitable for a wide range of coating applications, like can and container coatings, foil coatings, automotive coatings and waterborne formulations.

ALPEX® CK 450/PAST is a polyisoprene-based binder and crosslinking agent. It is used in coatings such as anti-corrosion and chemical-resistant paints, as well as in tank coatings. Additionally, it is suitable for use in letterpress, offset, and screen printing inks. This product offers excellent chemical resistance, improved gloss, and scratch resistance, while minimizing misting during application.