Products

EBECRYL® 3720 is a bisphenol A epoxy diacrylate that is the industry standard in performance and consistency. It exhibits light color and fast cure response. Films of EBECRYL® 3720 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. EBECRYL® 3720 finds broad use in UV/EB applications, such as inks, coatings, and overprint varnishes and offers improved formulation stability.

CYMEL® UI-19-I resin is a partially iso-butylated urea resin supplied in iso-butanol. The fast drying properties provide good block resistance and makes CYMEL® UI19-I resin suitable for ambient and low bake industrial wood finishes.

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 also contains primary hydroxyl groups that can be utilized for dual cure polymerization. Dual cure can provide instantaneous tack-free coating surfaces via UV or EB exposure while reaction of the hydroxyl groups with a suitable isocyanate enables polymerization in regions of the coating where UV or EB energy exposure is insufficient or absent.

EBECRYL® 3603 is an epoxy novolac acrylate diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) . EBECRYL 3603 exhibits rapid cure upon exposure to ultraviolet light (UV) or electron beam (EB) and superior chemical and thermal resistance.

CARPOL® PGP-2740 is a propylene glycol-initiated polyether polyol. CARPOL® PGP-2740 has a functionality of two and an average molecular weight of 2700 Da. This diol is polymerized with propylene oxide and then capped with 40% ethylene oxide. The outcome is a polyol with enhanced reactivity and hydrophilicity.

EBECRYL® 8296 is an aliphatic urethane acrylate designed for use in applications requiring haptic properties (e.g. “soft touch”). Films of EBECRYL® 8296 cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft, flexible, and resistant to yellowing coupled with high surface tack.

EBECRYL® 264 is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDDA). Films of EBECRYL® 264 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, abrasion resistance, and are resistant to yellowing.

EBECRYL® 895 is a dipentaerythritol hexaacrylate belonging to the acrylics and acrylates chemical family. It functions as a monomer and oligomer in CASE ingredients.

EBECRYL® 3700-25R is the bisphenol A epoxy diacrylate, EBECRYL® 3700, diluted 25% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 3700-25R exhibits low odor and fast cure response. Films of EBECRYL® 3700-25R cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, high surface hardness, and the superior chemical resistance typical of an epoxy resin.

EBECRYL® 809 is a modified polyester acrylate designed to exhibit greater flexibility and impact resistance than typical polyester acrylates. Films of EBECRYL® 809 cured by ultraviolet light (UV) or electron beam (EB) provide good flexibility, high gloss, toughness and surface hardness.

ROSHIELD™ 3275 is specifically designed for reaction with water- dispersible polyisocyanates for wood coating applications where early hardness and sandability are important, under mild drying conditions. Unlike nitrocellulose lacquers, solventborne 2-component polyurethanes, and solventborne acid catalyzed finishes, waterborne polyurethane coatings based on this acrylic polyol have extremely low VOCs and very good early print resistance. In addition, films based on this emulsion are water- white and resistant to yellowing. ROSHIELD™ 3275 cures under ambient conditions, but heat on-line is recommended for early pack-out. Applications for this excellent, cost/performance, 2- package system include clear, pigmented and flatted systems for office and laboratory furniture, kitchen cabinets and fine furniture.

CARPOL® GP-1000-60 Polyolis a glycerin-initiated polyether polyol. The resulting material has a functionality of three and an average molecular weight of 1000 Da. This triol is polymerized solely with propylene oxide for controlled reactivity. Main applications include C.A.S.E., however, CARPOL® GP-1000-60 Polyol may also be included as a component in other urethane products and formulations.

EBECRYL® 838 is a polyester hexaacrylate that exhibits fast cure response and moderate viscosity. Films of EBECRYL 838 cured by ultraviolet light (UV) or electron beam (EB) demonstrate good abrasion and scratch resistance, solvent resistance and hardness.

EBECRYL® 452 is a low viscosity polyester acrylate oligomer that exhibits exceptional pigment wetting properties making it an ideal pigment grinding resin. EBECRYL® 452 also gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). EBECRYL® 452 is used for the preparation of highly loaded pigment pastes produced using 3-roll or bead mills. EBECRYL® 452 can be used for grinding all process colors and spot colors.

EBECRYL® LEO 10552 is a low viscosity amine modified polyether acrylate oligomer that provides low extractables, low odor and low migration after UV or EB curing. EBECRYL® LEO 10552 is recommended for use in low odor and low migrating UV overprint varnishes (OPV’s) and inks for indirect food packaging applications.