Products

CYMEL® 1125 resin is a highly methylated/ethylated, carboxyl-modified benzoguanamine crosslinker supplied in 2-butoxy ethanol. It is especially designed for electro-deposition primer formulations requiring excellent corrosion and detergent resistance. The structure of CYMEL® 1125 resin offers superior adhesion to metal substrates. CYMEL® 1125 resin can be used in a wide range of general purpose industrial finishes. However, because CYMEL® 1125 resin contains chelating groups which can form colored compounds with heavy metal ions such as iron and zinc, it is recommended for use in only dark single coat applications or primers, and not in pastel colors. Benzoguanamine resins have poor resistance to UV light, hence CYMEL® 1125 is not suitable for exterior applications

CYMEL® 3020 resin is a highly alkylated, mixed ether (methyl/n-butyl) melamine crosslinker. Its hydrophobic nature combined with very good film appearance properties makes CYMEL® 3020 resin suitable for automotive topcoat applications. CYMEL® 3020 is insoluble in water but has excellent compatibility with water soluble backbone polymers and provides very good stability in pHbuffered alkaline waterborne formulations.

PTMEG-1000 is used in industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

PTMEG-2000 is used in DIY & consumer and industrial and assembly adhesives. It is compatible with polyamide, polyesters, and polyurethane substrates.

CYMEL® 250 Resin is a new type of mixalkylated methylated and n-butylated melamine formaldehyde resin with high imino functions. It is designed specifically for automotive coating system and does not require a strong acid catalyst for fast cure response. CYMEL® 250 Resin is similar reactivity to conventional n-butylated melamine resin. A formulation by using CYMEL® 250 Resin can achieve lower VOC, compared to a formulation by using conventional n-butylated melamine formaldehyde resin.

PACE® 383 is a vinyl acetate homopolymer made in a polyvinyl alcohol colloidal system

CYMEL® 328 resin is a methylated high imino melamine crosslinker supplied in water. Its high reactivity and low formaldehyde release during cure makes CYMEL® 328 resin suitable for a wide range of fast-curing waterborne industrial coating formulations, such as can and coil coatings, OEM and foil coating applications

CYMEL® 27-802 resin is a general purpose partially n-butylated melamine resin supplied in a mixture of n-butanol and xylene . CYMEL® 27-802 combines fast curing speed with good resistance properties making it suitable for a wide variety of industrial bake finishes including decorative metal coatings

EBECRYL® MPDDA is a difunctional monomer which polymerizes when exposed to sources of free radicals. This difunctional acrylated monomer is particularly useful in inks and coatings where improved elasticity, weathering and adhesion are desired in combination with an excellent water resistance.

AQUAPOL® PT-17000-62 Prepolymer is a toluene diisocyanate-based urethane polymer uti- lized in the manufacturing of hydrophilic foams and coatings. Aquapol® PT-17000-62 pre- polymer has found use in a wide range of applications ranging from medical foams, visco- elastic earplugs, cosmetic sponge, and specialty coatings and foams. Due to the hydro- philic backbone, this polymer and resultant foams and coatings absorb and retain a large quantity of liquid (water and alcohol).

EBECRYL® 1606 is a bisphenol A epoxy diacrylate diluted with 20-25% of trimethylolpropane triacrylate (TMPTA)(1) monomer. EBECRYL® 1606 is characterized by its light color, low odour and fast cure response. Films of EBECRYL® 1606 cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin.

CYMEL® 350 Resin is a highly methylated, monomeric melamine resin recommended for use in both waterborne and solvent-borne systems. It has very good water solubility properties, which makes it easy to incorporate with excellent stability in emulsion systems, as it remains in the water phase and does not migrate to the polymer phase. Like CYMEL® 350 Resin, it is a very efficient crosslinking agent and is recommended for coil coatings and high solids systems. CYMEL® 350 Resin has a slightly slower cure response than other monomeric methylated melamine resins. This provides excellent flow and levelling characteristics and less solvent popping on cure

PACE® 382 is a vinyl acetate homopolymer made in a polyvinyl alcohol colloidal system

EBECRYL® 1885 is an undiluted polyesteracrylate resin. Films of EBECRYL® 1885 cured by ultraviolet light (UV) or electron beam (EB) exhibits high flexibility and excellent abrasion resistance. EBECRYL® 1885 is recommended for parquet floor and furniture applications.