Products

PARALOID™ B-66 100% Resin thermoplastic acrylic resin is an excellent general-purpose resin with the same characteristics as the solution grade. In appropriate solvents, PARALOID™ B-66 100% Resin acrylic resin forms clear solutions, which air-dry extremely fast to form hard, colorless films which display excellent block resistance and color retention.

EBECRYL® 303 is a polymeric resin diluted 45% with the monomer 1,6-hexanediol diacrylate (HDDA)(1). This material is designed to be used alone or in combination with other UV/EB curable oligomers to provide improved adhesion of inks and coatings on plastic substrates.

EBECRYL® 4101 is an undiluted aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film.

ACRYLTAC® SP-409 is a high solids, multi-functional acrylic emulsion polymer.

EBECRYL® 605/40 is a bisphenol A epoxy diacrylate diluted approximately 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA) (1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance.

EBECRYL® 1859 is a high molecular weight acrylate especially developed for high speed UV, HUV, UV LED, and EB cured offset lithographic inks. EBECRYL® 1859 exhibits excellent lithographic behavior, very good pigment wetting and high reactivity.

EBECRYL® 4201 is an undiluted aliphatic urethane acrylate designed for wood coatings (cork and parquet) with a high grit feeder abrasion resistance.

EBECRYL® 4666 is a weather-stable undiluted aliphatic urethane acrylate having very low viscosity

EBECRYL® 629 is an acrylated epoxy novolac diluted with the reactive diluents trimethylolpropane triacrylate (TMPTA) and hydroxyethyl methacrylate (HEMA). When cured via ultraviolet light (UV) or electron beam (EB), EBECRYL® 629 exhibits high surface hardness, good heat resistance, low shrinkage, and good adhesion to metal, particularly copper. This resin was specifically designed for UV cure solder resist applications.

VANCRYL® 926 is a very low glass transition temperature acrylic polymer for film printing applications in the graphic arts industry. Inks made from this polymer exhibit excellent gloss, adhesion to polyolefins, ice water crinkle resistance, and fine printing characteristics. These properties are needed when converting packaging printing from solvent-based formulations to water-based formulations. VANCRYL® 926 emulsion is compatible with VANCRYL® 926 pigment dispersions as well as other commonly used dispersion resins. It also exhibits excellent compatibility with additives such as surfactants, adhesion promoters, and waxes. VANCRYL® 926 can be used as the backbone of printing inks and overprint coatings where various COF or slide angle requirements are needed, from a range of 0.25 to 0.45.

EBECRYL® LEO 10101 is a self-curing multifunctional acrylate enabling the UV curing of printing inks and coatings, not requiring additional photoinitiator, which reduces the risk of migration in indirect food contact applications. EBECRYL® LEO 10101 is specifically developed for making high reactive flexo inks with good flow and low migration. EBECRYL® LEO 10101 can be used for different colors also for white. It is recommended to use 20-30% EBECRYL® LEO 10101 in an ink or coating to reach a correct surface and through cure.

EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films of EBECRYL® 8402 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8402, Note that EBECRYL® 8402 typically develops a semi-crystalline aspect upon storage.

VANCRYL® 68 S is an aqueous solution of VANCRYL® 68 acrylic resin, with ammonia used to affect the solution. VANCRYL® 68 S provides outstanding pigment wetting along with the viscosity stability needed for aqueous gravure and flexographic inks. The transfer properties and hold-out characteristics of inks prepared with this resin solution are excellent. In coatings, VANCRYL® 68 S provides high gloss, scuff resistance, and hardness. VANCRYL® 68 S is compatible with most acrylic vehicles and other vehicles such as maleic resins. VANCRYL® 68 S is effective as a protective colloid in the production of styrene-acrylic copolymer emulsions.