Products

OTA 480 is a triacrylate reactive diluent based on a glycerol derivative. It exhibits low viscosity and good flexibility for a triacrylate and its high functionality contributes to good reactivity and hardness.

Polycin® D-265 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-265, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-265 will also impart the beneficial properties of castor oil derivatives, such as improved flow and leveling.

TMPTA is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance.

Polycin® D-290 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane coating systems. Polycin® D-290, with its very low viscosity, will allow for the formulation of higher system solids with improved VOC reduction. Polycin® D-290 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

HDDA is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance.

Polycin® D-140 is a 100% solids, castor oil-based derivative designed for use as a polyol or reactive diluent in polyurethane systems. Polycin D-140, with its very low viscosity and secondary hydroxyl groups, will allow for the formulation of higher system solids with improved VOC reduction and longer pot-life. Polycin® D-140 will also impart the beneficial properties of castor oil derivatives, such as improved flow and levelling.

APODIL 1018 is a low viscosity, aliphatic diepoxide reactive diluent based on Neopentyl glycol. It is compatible with all types of epoxy resins in any proportion.

DPGDA is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.

EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. EBECRYL® 110 is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility.

EBECRYL® 150 is an ethoxylated bisphenol A diacrylate commonly used as reactive diluent in UV/EB cure applications. EBECRYL® 150 can improve the cure response, hardness, and chemical resistance of UV/EB curable coatings and inks while maintaining good adhesion, and without imparting brittleness.

Caspol™ 5003 is a 100% solids castor oil based reactive diluent with a linear chain backbone having a low viscosity, good compatibility and wetting. Caspol™ 5003, a linear chain diol, is composed of a blend of primary and secondary hydroxyls which makes this polyol more reactive yielding slightly harder and less flexible components than either Caspol™ 5001 or DBTM Oil.

APODIL 1005 is a mono glycidyl ester of branched carboxylic acid. The product is used as reactive diluent for high viscosity epoxy resins.

TPGDA-A is a difunctional reactive diluent with a branched alkyl polyether backbone. Polymerization occurs when TRIPROPYLENE GLYCOL DIACRYLATE is exposed to sources of free radicals. It is widely used as a primary diluent in the formulation of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. TRIPROPYLENE GLYCOL DIACRYLATE is a grade of tripropylene glycol diacrylate with lower inhibitor content than the standard grade (TPGDA).

APODIL 1023 is a dimer acid based diglycidyl ester. The product is used as reactive diluent for high viscosity epoxy resins, which imparts flexibility, impact resistance and toughness.

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. EBECRYL® 113 is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics.