Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Chemical Name
- Product Code
- MITM00517
- Single Ingredient
- Yes
- Synonyms
- Propoxylated Glycerol Triacrylate
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Product Benefits
- Low viscosity
- Light color
- Low odor
- Excellent reduction of oligomer viscosity
UV/EB curable formulated products containing OTA-480 are characterized by:
- Good cure response
- Good flexibility
- Excellent hardness
Applications & Uses
- Coating End Applications
- Cure Method
- Ink & Toner End Applications
- Product Applications
OTA-480 is recommended as a reactive diluent for UV/EB cured inks and varnishes, especially where fast cure speed, high cross-link density and lower irritancy are desired.
Properties
- Physical Form
Safety & Health
- Safety Information
- Avoid contact with eyes, skin and clothing. Direct contact with this material may cause serious eye irritation. Repeated or prolonged dermal contact may cause allergic skin reactions.
- Wash thoroughly after handling. Use with adequate ventilation. Keep container closed.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage and Shelf Life Conditions
- The recommended storage temperature for OTA-480 is 4°C to 40°C (39°F to 104°F). Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container.
- This material should not be stored for more than 2 years.
Other
- Appearance
- Clear liquid
- Appearance (SDS)
- Clear liquid
- Color (SDS)
- Yellowish
- Flammability Class (SDS)
- Not an explosive
- Item Number
- Odor
- Low
- Odor (SDS)
- Ester acrylate
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Oxidizing Properties (SDS)
- Not oxidising
- Protect from Freezing
- Yes
- Temperature Control
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions Acid Value max. 0.4 mg KOH/g mg KOH/g - Material Composition
Value Units Test Method / Conditions Solvent Content max. 0.09 - residue - Optical Properties
Value Units Test Method / Conditions Color Scale max. 60.0 Pt-Co Pt-Co - Physical Properties
Value Units Test Method / Conditions Density 1.08 g/mL g/mL At 25°C Flash Point min. 100.0 °C °C SetaFlash Closed Cup Melting Point max. 0.0 °C °C Storage Temperature 39.2-104.0 °F °F Vapor Pressure max. 0.01 - At 20°C Viscosity 70.0-110.0 cPs cPs At 25°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Autoignition Temperature (SDS) min. 200.0 °C °C Boiling Point (SDS) min. 347.0 °C °C Density (SDS) 1.08 g/m³ g/m³ Flash Point (SDS) 208.0 °C °C Cleveland Open Cup Melting Point (SDS) max. -20.0 °C °C glass transition point Partition coefficient n-octanol/water (SDS) 2.52 - n-octanol/water Solubility In Water (SDS) 1200.0 mg/L mg/L Vapor Pressure (SDS) 0.0032 - At 20°C Viscosity (SDS) 134.0 - at 20°C, low viscous liquid Volatile Content (SDS) max. 0.3 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 24.0 -