Products

AEROSIL® OX 50 is the fumed oxide of our portfolio with the smallest specific surface area. High chemical purity, distinct low thickening and agglomeration properties are typical characteristics.

3M™ Glass Bubbles iM16K are high-strength polymer additives made from a water-resistant and chemically-stable soda-lime borosilicate glass. These hollow glass microspheres can be used as a low density filler material ideal for plastic and rubber parts created from injection molding, extrusion processes, and/or other vigorous processing equipment (e.g., Banbury mixers, etc.), offering improved processing over many conventional fillers. They can reduce final part weight by 15% or more without compromising the mechanical integrity. 3M™ Glass Bubbles iM16K help to reduce weight, improve dimensional stability, reduce shrinkage and sink marks, and contribute to material and process cost savings. They may be ideal additive materials for applications in the automotive, heavy truck, aerospace, electrical, sports and leisure, electronics, appliance and durable goods industries. 3M glass bubbles are also valuable in construction products such as polymer/wood composites and siding helping not only to reduce part weight, but also to improve dimensional stability and nail-ability.

3M™ Glass Bubbles iM30K are high-strength polymer additives made from a water-resistant and chemically-stable soda-lime borosilicate glass. These hollow glass microspheres can be used as a low density filler material ideal for plastic and rubber parts created from injection molding, extrusion processes, and/or other vigorous processing equipment (e.g., Banbury mixers, etc.), offering improved processing over many conventional fillers.

3M™ Glass Bubbles K20HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall density of the composite. These composites can be incorporated into deep sea syntactic foam buoyancy modules to improve uplift properties of the system at minimal foam volumes. The high strength of K20HS glass bubbles can withstand both the high processing shear forces of polymer mixing and the pressure of seawater in many applications. 3M™ Glass Bubbles K20HS have isostatic crush strengths of 750 psi with a minimum of 90% survival.

3M™ Glass Bubbles S28HS are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

3M™ Glass Bubbles S42XHS is high-strength additives for polymers made from a water-resistant and chemically stable soda- lime-borosilicate glass. These hollow glass microspheres can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system. The high strength of S42XHS glass bubbles can withstand both the high processing pressure of polymer extrusion and the pressure of seawater in many applications. The S42XHS glass bubbles have isostatic crush strengths of 8000 psi with a minimum of 90% survival.

3M™ Glass Bubbles XLD3000 are high-strength additives for polymers made from a water-resistant and chemically stable soda-lime-borosilicate glass. These hollow glass bubbles can be compounded with a variety of polymers to reduce the overall thermal conductivity of the composite. These composites can be coated or incorporated into deep sea oil pipelines to improve the flow assurance properties of the system.

AEROSIL® R 711 is a fumed silica aftertreated with a methacrylsilane.

AEROXIDE® Alu C Silica is a fine-particulate, pure aluminium oxide with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to an organic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

AP 8406 DS 40 is a very high molecular weight bisphenol A based epoxy polymer dissolved in diacetone alcohol/aromatic 100.

D.E.N.® 425 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. D.E.N.® 425 Epoxy Novolac Resin is an epoxidized phenolic resin of higher functionality than standard bisphenol Abased liquid epoxy resins. Epoxy novolac resins combine, in one molecule, the thermal stability of a phenolic backbone with the reactivity and versatility of an epoxy. They are distinguished by particular good thermal stability, mechanical strength and resistance against chemicals. They find ready acceptance for lining pipelines, storage tanks and pumps. D.E.N.® 425 Epoxy Novolac Resin has been developed to fill the gap between the two functional standard bisphenol F based liquid epoxy resins and the high viscous epoxy novolac resins. It has a viscosity similar to a standard bisphenol A based liquid epoxy resin. The multi-functionality, ± 2.5 epoxy groups per mole, of D.E.N.® 425 Epoxy Novolac Resin produces a more tightly cross-linked cured system than bisphenol A based liquid epoxy resins having improved high temperature performance and improved resistance against various chemical.

D.E.N.® 426 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac. D.E.N. 426 Epoxy Novolac Resin is an epoxidized phenolic resin of higher functionality than standard bisphenol A based liquid epoxy resins. Epoxy novolac resins combine, in one molecule, the thermal stability of a phenolic backbone with the reactivity and versatility of an epoxy. They are distinguished by particular good thermal stability, mechanical strength and resistance against chemicals. They find ready acceptance for lining pipelines, storage tanks and pumps. D.E.N.® 426 has been developed to fill the gap between the two functional standard bisphenol F based liquid epoxy resins and the high viscous epoxy novolac resins.

D.E.N.® 428 is a liquid reaction product of epichlorohydrin and phenol-formaldehyde novolac.

D.E.N.® 431 is a semi-solid reaction product of epichlorohydrin and phenol-formaldehyde novolac.