Products

Dynasylan® AMEO-T is a blend of primary and secondary aminofunctional silanes. The blend contains more than 90 wt% of 3­ aminopropyltriethoxysilane. Aminofunctional silanes posses a reactive amino group and a hydrolyzable ethoxysilyl group. The dual nature of this reactivity allows Dynasylan® AMEO­T to bind chemically to both inorganic materials (e.g. glass, metals and fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, a surface modifier and a reactive reagent. Dynasylan® AMEO­T is a yellowish liquid with an amine­like odor. It is soluble in alcohols as well as aliphatic or aromatic hydrocarbons.

PEBAX® MV 1074 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MV 1074 SP 01 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof. This SP grade has been developed to be heat and UV resistant.

Dynasylan® 1124 is a secondary aminofunctional methoxy- silane possessing two symmetric silicon atoms. Dynasylan® 1124 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used, for the chemical modification of substances. Dynasylan® 1124 is a colorless to yellow liquid with an amine-like odor, which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

PEBAX® MV 2080 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MV 2080 is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.

PEBAX® MV 1074 SA 01 is a thermoplastic elastomer made of flexible and hydrophilic polyether and rigid polyamide. Pebax® MV 1074 SA 01 resin is also an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof .

DERCOLYTE® TS 105, produced by copolymerization of terpene and styrene, is a very light-colored tackifying resin showing excellent adhesive performances. It is particularly recommended in hot melt pressure-sensitive adhesives formulations.

Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane possessing two symmetric silicone atoms. Dynasylan® 1122 acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier and can be used for the chemical modification of substances. Dynasylan® 1122 is a colorless to yellow liquid with an amine- like odor which is, for example, soluble in alcohols, aliphatic or aromatic hydrocarbons.

Dynasylan® AMEO is a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, crosslinker, and/or surface modifier.

Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYMO is a colorless low­viscosity liquid with a slight terpentine­like odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons.

Dynasylan® DAMO is a diamino­functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. Dynasylan® DAMO is a colorless to slightly yellowish liquid with an amine­like odour which is soluble in alcohols and aliphatic as well as aromatic hydrocarbons.

PEBAX® MH 1657 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MH 1657 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate also offers excellent permeability to moisture vapor while remaining waterproof.

Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons.

Dynasylan® AMMO is a bifunctional organosilane possessing a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMMO to bind chemically to both inorganic materials (e.g. glass, metals fillers) and organic polymers (e.g. thermosets, thermoplastics and elastomers), thus functioning as an adhesion promoter and a surface modifier. Dynasylan® AMMO is a clear, colorless liquid having an amine­like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons.

PEBAX® MH 2030 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax® MH 2030 is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.