Products

Calcinate® C-300CS is a 300 TBN oil soluble crystalline overbased calcium sulfonate. It is recommended for use in soluble oils, rust protective oils and semi-synthetic fluids as a chlorine replacement to impart enhanced extreme pressure characteristics of a crystalline overbased calcium sulfonates without the sediment formation. This product is used as a component in metal working fluids where the unique lubricity and extreme pressure properties of crystalline calcium carbonate are utilized. Calcinate® C300CS is compatible with most mineral base oils, white oils, and synthetic base stocks.

Durad® 150B is a t-butylphenyl phosphate ester. Triaryl phosphates are widely known as effective, ashless antiwear and mild extreme pressure additives for lubricants and functional fluids. The primary function of triaryl phosphates is to reduce friction and wear in applications where high loads cause boundary lubrication conditions. The Durad® product line offers the broadest range of physical and performance properties tailored for specific applications. The t-butylphenyl phosphates are one of several families of products in the lubricant additives product range. Other additives families include trialkyl phosphates, isopropylphenyl phosphates and cresol- and xylenol phosphates TYPICAL PROPERTIES Durad® t-butylphenyl phosphates are manufactured to provide a range of physical property characteristics as below. The values given are typical of the commercial products offered but are not guaranteed specifications.

Focus ChloroPar W-40 is a chlorinated compound based on C21-34 alkanes. This product can function as an extreme pressure additive, flame retardant, and plasticizer. A small amount of stabilizer has been added to maintain product quality during transport and storage.

Additin® M 49.001 is a hydrocarbon-based corrosion inhibitor, film former, and lubricity additive used in metalworking fluids, anti-rust oils, cutting fluids, dewatering fluids, drawing compounds, machining oils, and stamping oils. It provides excellent lubricity, good film formation, and wetting properties, with high biostability and low odor.

Naugalube® 438L is an antioxidant used in automotive fluids and lubricants, and transmission fluids. It is compatible with mineral oils and synthetic base stocks and applied in engine oils, gear oils, hydraulic fluids, industrial oils, and turbine and compressor oils.

NYONOL™ LP-625 is a water insoluble polyalkene glycol (PAG). It is a clear liquid at room temperature with a low vapor pressure. NYONOL™ LP-625 exhibits excellent lubricity and can be used in various industrial lubricating applications.

BS-1C-A25 is a new composite clay suitable for using in a broad range of coatings systems including epoxies and unsaturated polyesters. BS-1C-A25 imparts excellent sag resistance, thixotropy and suspension property.

Additin® M 49.003 is an organic wax-based corrosion inhibitor, film former, lubricity additive, and wetting agent used in metalworking fluids, including cutting oils, drawing oils, rolling oils, and stamping oils. It provides excellent lubricity, corrosion protection, good film formation, wetting properties, and has a low odor.

MARLOX® RT 42 is one of the many low foaming EO/PO non-ionic surfactants produced by Sasol Chemicals in Germany. These alcohol alkoxylates are based on Sasol’s wide range of linear and semi linear fatty alcohols. They are produced by alkoxylation of the fatty alcohols to varying degrees using ethylene oxide and propylene oxide. MARLOX RT 42 is a clear to slightly turbid liquid at room temperature and essentially 100% active.

Esterex™ NP343 is a API category Group V fluids. Esterex™ NP343 has excellent low temperature properties, good lubricating properties, and low volatilities. Esterex™ NP343 can be used as sole basestocks or blendstocks with other synthetic fluids in many automotive and industrial lubricant applications. Esterex™ NP343 is ideal for use in highly loaded, high speed lubricant applications where energy efficiency is desired.

Additin® RC 9330 N is a chemical blend used as an additive package, antioxidant, and corrosion inhibitor in gear oils and hydraulic fluids. It is compatible with metal, non-ferrous metal, and steel substrates. The product provides excellent corrosion resistance, demulsibility, filterability, oxidation stability, thermal stability, and high load-carrying capacity. It is certified Halal and Kosher, making it suitable for various lubricating applications that require these certifications.

Lithium-12-oxy-stearate is used in greases within fluids & lubricants. It features excellent gelling properties, good lubrication, a high drop point, and hydrophobic characteristics.

Additin® RC 5800 is a water-soluble liquid containing sodium tolyltriazole, a corrosion inhibitor commonly used in recirculating cooling water systems, antifreeze, and metalworking fluids. It provides excellent corrosion inhibition and anti-freezing properties. It is also compatible with a variety of metals and is ideal for industrial applications requiring protection against corrosion in hydraulic and cooling systems.

NACOL Ether 8 are high purity biodegradable dialkyl ethers derived from analogous linear alcohols. NACOL Ethers are available with chain lengths between C12 and C36. NACOL Ether 8 is a low viscosity oil with good spreading properties. The specific structure of the ether provides polarity which yields advantageous solubility and solvent characteristics.

Focus RP 12 is a water-soluble corrosion inhibitor designed for use in synthetic and semi-synthetic metalworking fluids and water-based cleaners. It is a boramide with a unique combination of amines, giving it a relatively high pH and reserve alkalinity. Focus RP 12 does not contain diethanolamine.