Products

WC-31655 Phthalo Blue RS is used in decorative coatings and in industrial additives for paper. It features excellent stability, high color strength, and low viscosity. It functions as a pigment in CASE ingredients.

Exolit® AP 428 is a fine-particle ammonium polyphosphate produced by a special method. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable. Exolit® AP 428 differs from most other commercial products in the following ways, greatly reduced solubility in water lower viscosity in aqueous suspensions, lower viscosity in PU polyol suspensions.

KRONOS® 2360 is suitable for the highest demands on the weather resistance of coatings and plastics.

Foral® 105 resin is the pentaerythritol ester of highly hydrogenated gum rosin. A pale thermoplastic resin, it offers advantages as a tackifier or modifier in various adhesive and coating compositions. Foral® 105 resin exhibits outstanding resistance to oxidation and to discoloration caused by heat and ageing. It has a substantially higher softening point than glycerol rosin esters, and is therefore recommended where a harder resin may be desirable.

KRONOS® 2056 a versatile pigment with a warm tone.

KRONOS® 2044 is a special pigment with a high level of inorganic surface treatment for heavily filled systems.

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

ZINCUM SW 2309 is in low bulk density, fine white powder.

KRONOS® 2450 is a versatile pigment for a wide range of plastics.

HYDROGRAL® P is a pentaerythritol ester of partially hydrogenated rosin. It is specially recommended to improve oxidation resistance and long term adhesive performances of pressure sensitive adhesives.

Exolit® AP 420 is an approx. 45 % clear to cloudy aqueous solution of a short chain ammonium polyphosphate.

KRONOS® 2066 is used for superior opacity and high gloss development.

Licocare® RBW 101 flakes VITA is a polar modified wax based on renewable resource.

Exolit® AP 435 is a fine particle ammonium polyphosphate (phase II) optimized for low viscosity in aqueous suspension and intumescent coatings. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic and non-flammable.

Exolit® AP 422 A is a fine-particle ammonium polyphosphate (phase II) with less than 0.1% melamine. The product is largely insoluble in water and completely insoluble in organic solvents. It is colorless, non-hygroscopic, non-flammable, and classified as SVHC-free under current regulations.