Products

Focus Nilfoam 718 is a free-rinsing, organo silicone emulsion and is very effective on a range of surfactant based foams in water-based systems. Focus Nilfoam 718 will effectively control foam in a variety of applications including metalworking coolants, water-based adhesives, wastewater treatment systems, and latex systems.

SOCER BRAZIL COL 1440 WW/X S Elliottii Rosin obtained by distillation of crude gum / pine oleoresin collected from Pinus trees (live).

Foral® 85 resin is a glycerol ester of hydrogentated gum rosin. It is an exceptionally pale, thermoplastic resin that has outstanding resistance to oxidation and to discoloration caused by heat and ageing. It can be used in a wide array of adhesive tackifier applications and in protective/barrier type coatings where light color and oxidation resistance are needed.

SOCER BRAZIL COL 1440 is 100% Elliottii Rosin obtained by distillllation of crude gum / pine oleoresin collected from Pinus trees (live).

Dynasylan® SILBOND® H-5 is a clear, low-viscosity pre-hydrolyzed ethyl polysilicate binder that has been designed for the precision investment casting industry. It contains a higher percentage (approximately 19.5%) silica content (as SiO₂) and a lower acidity level than Dynasylan® SILBOND® H-4. It is well suited for use in block-casting applications.

OREVAC® 18343 is a maleic anhydride grafted linear low-density polyethylene. OREVAC® 18343 has been designed to develop a reliable bonding strength between polyethylene or ethylene copolymers and mineral fillers such as aluminum trihydrate (ATH) or magnesium hydroxide (MDH). It is an effective coupling agent for halogen- free flame retardant (HFFR) compounds using high loadings of mineral fillers, such as compounds for insulation and sheathing of wires and cables.

DRY #1 Castor Oil is a Technical Grade pure castor oil having a very low moisture content at 0.02% maximum. Also known as ricinus oil, it is a triglyceride of fatty acids which occurs in the seed of the castor plant, Ricinus communis. The low moisture content makes this product ideal for lubricant or polyurethane applications where low moisture is required.

Pale 1000 Blown Castor Oil commonly known as blown oils have increasing viscosities resulting from oxidative and crosslink polymerization at the double bonds and hydroxyl groups. Oxidative polymerization of castor oil yields products with increased viscosities and decreasing solubility in aliphatic solvents, increasing compatibility with various resins and improved ability to wet and disperse pigments while imparting solvent and abrasion resistance to lacquer systems. The polymerized oils are used to plasticize a variety of resins in adhesive and sealant systems, inks and hot melts. The heavier viscosity polymerized oils are processing aids and plasticizers for rubber polymers, imparting oil and solvent resistance.