Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Function
- Binder
- Product Code
- MITM00319
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Application Method
- Coating End Applications
- Compatible Substrates & Surfaces
- Cure Method
- Markets
- Applications
- Product Applications
- EBECRYL® 4265 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet, plastics and film.
- Formulating Information
- Coatings can be adjusted to appropriate viscosity for the application with additional TPGDA or the addition of other standard reactive diluents such as 1,6-hexanediol diacrylate (HDDA), isobornyl acrylate (IBOA), and trimethylolpropane triacrylate (TMPTA) or solvents such as butyl acetate.
- EBECRYL 4265 is compatible with most acrylate monomers and oligomers. Because of the many potential combinations with reactive diluents and solvents, compatibility must be tested in each individual case.
- UV curing of coatings formulated with EBECRYL 4265 requires the addition of standard commercial photoinitiators. Typical levels are 4-6%, though this may vary to meet the reactivity requirements of the application. In the case of EB curing, a low oxygen atmosphere must be ensured to avoid surface inhibition.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Contains any chemicals listed on Prop 65 (including impurities, residues, catalysts, monomers, and by-products and excluding heavy metals)?
Safety & Health
- Safety Precautions
- Avoid contact with eyes and skin.
- Direct contact with this material may cause moderate eye and slight skin irritation.
- Wash thoroughly after handling.
- Keep container tightly closed.
- Use with adequate ventilation.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- The recommended storage temperature range for EBECRYL 4265 is 4°C to 40°C (39°F to 104°F).
- Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids.
- Prevent inadvertent contact with peroxides and other radical initiators and contact with copper, copper alloys, carbon steel, iron and rust.
- This might cause uncontrollable polymerization of the product with the generation of heat.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers.
- Procedures that remove or displace oxygen from the material should be avoided.
- Do not store this material under an oxygen free atmosphere.
- Dry air is recommended to displace material removed from the container.
Other
- Appearance (SDS)
- Liquid
- Color (SDS)
- Yellowish
- IATA/ICAO Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IATA/ICAO Technical name (N.O.S.)
- Acrylated resin
- IATA/ICAO UN Number
- UN3082
- IMO/IMDG Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- IMO/IMDG Technical name (N.O.S.)
- Acrylated resin
- IMO/IMDG UN Number
- UN3082
- Immiscible In (SDS)
- Water
- Item Number
- Odor (SDS)
- Odorless
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- TDG Canada Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- TDG Canada Technical name (N.O.S.)
- Acrylated resin
- TDG Canada UN Number
- UN3082
- USA/DOT Proper Shipping Name
- Environmentally hazardous substance, liquid, N.O.S.
- USA/DOT Technical name (N.O.S.)
- Acrylated resin
- USA/DOT UN Number
- UN3082
- Optical Properties
Value Units Test Method / Conditions Color Scale max. 200.0 APHA Color Scale max. 200.0 Hazen Hazen Color Scale - Chemical Properties
Value Units Test Method / Conditions Acid Value 1.0 mg KOH/g Hydroxyl Content 0.3 % - Mechanical Properties
Value Units Test Method / Conditions Elongation 13.0 % at break, cured Tensile Strength 5800.0 psi Cured - Physical Properties
Value Units Test Method / Conditions Density 1.12 g/mL At 20°C Flash Point min. 100.0 °C Viscosity 500.0-1100.0 mPa.s at 23°C - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) min. 100.0 °C Density (SDS) 1.12 g/cm³ DIN 51757 at 20°C Flash Point (SDS) min. 100.0 °C DIN EN ISO 2719 Vapor Pressure (SDS) max. 110.0 hPa At 50°C Viscosity (SDS) 800.0 mPa.s DIN EN ISO 3219 at 23°C