Enhanced TDS
Identification & Functionality
- Blend
- No
- CASE Ingredients Functions
- Chemical Family
- Product Code
- MITM14284
- Single Ingredient
- Yes
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Labeling Claims
- Product Performance
UCECOAT® 7690 is characterized by:
- Translucent appearance
- Low viscosity
- Tack-free after water evaporation
- Excellent water release
UV/EB cured products based on UCECOAT® 7690 are characterized by the following performance properties:
- Excellent outdoor resistance
- High flexibility
- Good chemical resistance
The actual properties of UV cured products also depend on the selection of the other formulation components, such as additives and photo initiators.
Applications & Uses
- Application Method
- Coating End Applications
- Cure Method
- Product Applications
- Formulated UV curable products containing UCECOAT® 7690 may be applied by spray-, roller- and curtain coating methods.
- UCECOAT® 7690 is recommended as binder in applications demanding excellent outdoor properties.
Properties
- Physical Form
Safety & Health
- Safety Information
The toxicological properties of this material have not been fully determined. Products of this type can be expected to be eye and skin irritant and have the potential to cause sensitization or other allergic responses. Appropriate precautions should be taken to avoid eye and skin contact and to avoid inhalation of the aerosols or vapours. Consult the relevant Safety Data Sheet for appropriate handling procedures and protective equipment prior to using this or any other material referred to in this bulletin.
Packaging & Availability
- Packaging Type
Principal Information
- Group Principal Number
- S000001
- Principal
Storage & Handling
- Storage Conditions
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Due to presence of water, UCECOAT® 7690 needs to be stored above freezing temperatures.
- Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. This material should not be stored for more than 1 year.
Other
- Appearance
- Translucent liquid
- Appearance (SDS)
- Dispersion
- Color (SDS)
- Clear to milky white
- Item Number
- Miscible in (SDS)
- Water, all proportions
- Odor (SDS)
- Amine - like
- Other Hazards
- Polymerization may occur from excessive heat, contamination or exposure to direct sunlight .
- Oxidizing Properties (SDS)
- None
- Protect from Freezing
- Yes
- USA/DOT UN Number
- Not Applicable
- Chemical Properties
Value Units Test Method / Conditions pH 7.0-8.0 - - Shelf Life & Stability
Value Units Test Method / Conditions Shelf Life 1.0 yr yr - Mechanical Properties
Value Units Test Method / Conditions Elongation 15.0 % % - Physical Properties
Value Units Test Method / Conditions Density 1.1 g/cm³ g/cm³ At 25°C Film Forming Temperature 6.0 °C °C Glass Transition Temperature (Tg) 96.0 °C °C UV cured Particle Size max. 100.0 nm nm Storage Temperature 39.0-104.0 °F °F Viscosity max. 500.0 mPa.s mPa.s Brookfield Viscometer at 25°C - Material Composition
Value Units Test Method / Conditions Solid Content 35.0 %(W/W) %(W/W) - SDS Physical and Chemical Properties
Value Units Test Method / Conditions Boiling Point (SDS) 100.0 °C °C Water Flash Point (SDS) min. 100.0 °C °C Specific Gravity (SDS) 1.07 - Vapor Pressure (SDS) 23.0 hPa hPa At 20°C Viscosity (SDS) max. 500.0 mPa.s mPa.s at 25°C, 50rpm Viscosity (SDS) max. 500.0 mPa.s mPa.s at 25°C RPM: 50 Volatile Content (SDS) 63.5-66.5 %(W/W) %(W/W) pH (SDS) 7.0-8.5 -